Users Guide
Prev |  | Next

Links: Table of Contents | Single HTML | Single PDF

## Users Guide

## 1. Overview

### 1.1. Introduction

This document describes the new features available in this release of the JAX-WS RI. The main focus of this document is to describe the tools used to develop JAX-WS RI 2.2.6 web service endpoints and clients. Readers of this document should be familiar with web services XML, XML Schema and WSDL. Familiarity with JAX-RPC 1.1 may also be beneficial but is not necessary.

The documentation/samples discusses how to use JAX-WS in a non-Java EE 5 servlet container using a proprietary deployment descriptor `sun-jaxws.xml` and servlet `com.sun.xml.ws.transport.http.servlet.WSServlet`. This means that you can run JAX-WS RI applications in any servlet container that has been enabled with the JAX-WS RI. Applications that use the proprietary DD and servlet will run in a JAX-WS RI enabled Java EE 5 servlet container, but they will be non-portable. If you wish to use JAX-WS in a Java EE container in a Java EE portable manner you need to use the standard Java EE 5 deployment descriptor; please refer to the Java EE 5 or Glassfish documentation/samples. The majority of the documentation included with JAX-WS is valid with Java EE 5 as well.

### 1.2. Features

#### 1.2.1. JAX-WS 2.2 API

JAX-WS 2.2 is a Maintainence Release of JAXWS 2.0 API.

JAX-WS 2.2 has the following new features from JAX-WS 2.1 specification:

- Support for JAXB 2.2 APIs (JSR 222)

- Support for WS-Addressing 1.0 - Metadata specification

- Support for `@XmlElement` on SEI's wrapper parameter

- Support for `@XmlType` on exception classes

- HTTP SPI

- Provide API to create Endpoint with features

JAX-WS 2.1 has the following new features from JAX-WS 2.0 specification:

- WS-Addressing support

- APIs for EndpointReference

  - Creation

    - `BindingProvider.getEndpointReference()`

    - `Endpoint.getEndpointReference()`

    - `MessageContext.getEndpointReference()`

  - EPR Propagation

    - Using JAXB 2.1 bind W3C EPR to `W3CEndpointReference` class

    - Marshall/Unmarshall `W3CEndpointReference` class using JAXB

- User friendly APIs to enable/disable features, such as MTOM and Addressing

JAX-RPC users should note that JAX-WS is a completely different technology than JAX-RPC and thus cannot run JAX-RPC applications on top of JAX-WS. If you have an existing JAX-RPC application it must be converted to work with JAX-WS.

#### 1.2.2. Fully Dynamic Runtime

In JAX-WS, all artifacts generated by apt, wsimport and wsgen are portable. JAX-WS uses the annotations within the SEI to aid in marshalling/unmarshalling messages. Because we no longer generated non-portable artifacts, we were able to get rid of tools like JAX-RPC's wsdeploy. The user now can create their own deployable WAR file. To learn more about creating a WAR file and the deployment descriptor, see WAR File Packaging. It should also be noted that JAX-RPC's wscompile tool has been replaced by two new tools: wsimport and wsgen. wsimport is used for importing WSDLs and generating the portable artifacts. wsgen processes a compiled SEI and generates the portable artifacts. Unlike JAX-RPC's wscompile JAX-WS's wsgen does not generate WSDL at tool-time, the WSDL is now generated when the endpoint is deployed. There however is an option on wsgen to generate the WSDL for developement purposes.

#### 1.2.3. MTOM & swaRef

MTOM and swaRef support was added in JAX-WS 2.0 RI FCS release. MTOM and swaref support is required by the JAX-WS 2.0 specification. This means that the MTOM or swaref solution developed with JAX-WS RI will be fully portable with any JAX-WS 2.0 compliant implementation.

MTOM implementation was completely re-written to allow streaming attachment support and just like rest of the JAX-WS RI runtime its written for better performance. This implementation was released as part of JAX-WS 2.0.1 M1 release.

JAX-WS 2.2 brings in support for optimized transmission of binary data as specified by MTOM (SOAP Message Transmission Optimization Mechanism)/ XOP (XML Binary Optimized Packaing) and swaRef (SOAP Attachment References specified by WS-I Attachment Profile 1.0).

- MTOM allows optimized transmission of binary data - any `xs:base64Binary` or `xs:hexBinary` schema type can be send as attachment following rules defined by XOP encoding and MTOM specification.

- In swaRef, an XML element of `wsi:swaRef` type (defined by WS-I Attachment Profile 1.0) is send as attachment and a referenced based on CID URL schema is put in place of the content of the element.

For details on MTOM and swaRef features refer to MTOM and Swaref.

#### 1.2.4. SOAP 1.2

SOAP 1.2 support is added to JAX-WS 2.2. For details refer to SOAP 1.2.

#### 1.2.5. XML/HTTP Binding

Support for XML/HTTP binding is added to JAX-WS 2.0. One can directly send XML over HTTP using Provider and Dispatch implementations. This enables support for REST style Web Services in JAX-WS. For details refer to restful sample.

#### 1.2.6. JAXB 2.2

JAX-WS RI 2.2.6 uses JAXB 2.2 for data-binding between Java and XML which enables features such as separate compilation, type substitution and other improvements.

##### 1.2.6.1. Type Substitution using `@XmlSeeAlso`

JAXB 2.1 defines `@XmlSeeAlso` annotation which can be used to tell JAXB to use the classes mentioned with this annotation. This allows type substitution to takes place. See the sample that demonstrates it.

wsimport tool, generates `@XmlSeeAlso` with all the classes that are not directly referenced by the WSDL operations. To capture all such classes wsimport generates `@XmlSeeAlso(ObjectFactory.class)` on the generated Service Endpoint Interface.

##### 1.2.6.2. `@XmlElement` on web service SEI parameters

JAX-WS 2.2 spec allows `@XmlElement` on web service SEI parameters, which enables better control of XML representation. For this support, JAX-WS relies on JAXB 2.2 API which allows the `@XmlElement` annotation on parameters.

#### 1.2.7. WS-Addressing

JAX-WS RI 2.2.6 supports for W3C Core, SOAP Binding and Addressing 1.0 - Metadata specifications and defines standard API and annotations to enable/disable W3C WS-Addressing on the client and service endpoint. In addition to that, JAX-WS RI also supports Member Submission version of WS-Addressing. The member submission version is supported in an implementation specific way. For compatility with JAX-WS 2.1 behavior, JAX-WS RI 2.2 also supports wsdls conforming to WSDL Binding specification.

Refer to WS-Addressing for more details. See WS-Addressing samples fromjava-wsaddressing, fromwsdl-wsaddressing-policy and fromwsdl-wsaddressing with the JAX-WS RI 2.2.6 for details on the WS-Addressing programming model.

#### 1.2.8. Annotations

JAX-WS 2.2 relies heavily on the use of annotations as provided by A Metadata Facility for the Java Programming Language (JSR 175) and and Web Services Metadata for the Java Platform (JSR 181) as well as additional annotations defined by JAX-WS 2.2. These annotations are used to customize the mapping from Java to XML schema/WSDL and are used at runtime to alleviate the need for non-portable serializers/deserializers that were generated in JAX-RPC 1.x.

The JAX-WS RI utilizes an apt (annotation processing tool) that was introduced in J2SDK 5.0. apt allows the SI to process Java source files directly to generate the portable artifacts specified by the JAX-WS 2.0 specification. apt will be covered in more detail in section 6.

For more information on the annotations used by JAX-WS 2.0 please refer to Annotations.

#### 1.2.9. Customizations

JAX-WS RI 2.2.6 carries forward customization support introduced in JAX-WS 2.0 RI.

- Define a package where Java artifacts mapped from a WSDL file will be generated

- Package customization for value classes mapped from the imported XML schemas by the WSDL document

- Handler chain customization

JAX-WS 2.0 specification defines standard XML based customization for a WSDL file to Java mapping and to control certain features. These customizations, or binding declarations, can customize almost all WSDL components that can be mapped to Java, such as the service endpoint interface class, method name, parameter name, exception class, etc. The other important thing you can do with these binding declarations is to control certain features, such as asynchrony, provider, wrapper style, and additional headers. For example, a client application can enable asynchrony for a particular operation in a portType, all operations in a `portType`, or all `portType` operations defined in the WSDL file.

These binding declarations can be inlined in a WSDL file or can live outside as an external file. The binding declarations closely align with the JAXB binding declarations. An application importing a WSDL file can inline JAXB bindings inside JAX-WS binding declarations to customize the inlined schema declared in the WSDL file. Schema files that are imported from a WSDL file can be customized using JAXB binding files and can be passed to wscompile using the `-b` option switch.

These are the main customization features:

- Scoped binding declarations. An XPath expression is used to specify the target node of the WSDL file on which customization should be applied.

- Close alignment with JAXB bindings. JAXB binding declarations can be inlined in an external JAX-WS binding file.

- Feature Control. Features such as asynchrony, wrapper style, additional header mapping, and provider interfaces can be enabled or disabled.

- Handler chain customization (not yet specified by the 2.0 specification)

The following WSDL component's mapped Java names can be modified:

- generated service endpoint interface class

- method

- method parameter

- generated exception class (for WSDL fault and header fault exceptions)

- header parameter

- generated service class

- port accessor methods in the generated service class

XML Schema Java mapping can be customized using standard JAXB customizations.

For more information on the customizations used by JAX-WS 2.0 please refer to WSDL Customization.

#### 1.2.10. Improved Handler Framework

JAX-WS 2.0 specification defines two types of handlers: logical and protocol handlers. While protocol handlers have access to an entire message such as a SOAP message, logical handlers deal only with the payload of a message and are independent of the protocol being used. Handler chains can now be configured on a per-port, per-protocol, or per-service basis. A new framework of context objects has been added to allow client code to share information easily with handlers.

For more information on the handler framework in JAX-WS RI 2.2.6 please refer to Handler.

#### 1.2.11. Provider

Web service endpoints may choose to work at the XML message level by implementing the `Provider` interface. Here the endpoints access messages or message payloads using this low level, generic API.

For more information on providers in JAX-WS RI 2.2.6 please refer to Provider.

#### 1.2.12. Dispatch

The Dispatch API is intended for advanced XML developers who prefer to use XML constructs at the `java.lang.transform.Source` or `javax.xml.soap.SOAPMessage` level. For added convenience use of the `Dispatch` API with JAXB data-bound objects is supported. The `Dispatch` API can be used in both `Message` and `Payload` modes.

For more information on the `Dispatch` please refer to Dispatch.

#### 1.2.13. Asynchronous Client Operations

For more information on asynchronous clients in JAX-WS RI 2.2.6 please refer to Asynchronous Client.

### 1.3. Programming Model

This section of the documentation will focus on the programming model for both developing and publishing a web service endpoint, and writing a web service client. A web service endpoint is the implementation of a web service. A web service client is an application that accesses a web service.

#### 1.3.1. Server

When developing a web service endpoint, a developer may either start from a Java endpoint implementation class or from a WSDL file. A WSDL (Web Services Description Language) document describes the contract between the web service endpoint and the client. A WSDL document may include and/or import XML schema files used to describe the data types used by the web service. When starting from a Java class, the tools generate any portable artifacts as mandated by the spec. When starting from a WSDL file and schemas, the tools generate a service endpoint interface.

There is a trade-off when starting from a Java class or from a WSDL file. If you start from a Java class, you can make sure that the endpoint implementation class has the desirable Java data types, but the developer has less control of the generated XML schema. When starting from a WSDL file and schema, the developer has total control over what XML schema is used, but has less control over what the generated service endpoint and the classes it uses will contain.

##### 1.3.1.1. Starting from Java

The basic process for deploying a web service from a Java class consists of two steps.

1. Generate portable artifacts.

2. Create a WAR file to deploy

##### 1.3.1.2. Generate Portable Artifacts

Portable artifacts generated by JAX-WS RI 2.2.6 include zero or more JavaBean classes to aide in the marshaling of method invocations and responses, as well as service-specific exceptions.

In document/literal wrapped mode, two JavaBeans are generated for each operation in the web service. One bean is for invoking the other for the response. In all modes (rpc/literal and both document/literal modes), one JavaBean is generated for each service-specific exception.

When starting from Java the developer must provide the JAX-WS tools with a valid endpoint implementation class. This implementation class is the class that implements the desired web service. JAX-WS has a number of restrictions on endpoint implementation classes. A valid endpoint implementation class must meet the following requirements:

- It must carry a javax.jws.WebService annotation (see JSR 181).

- Any of its methods may carry a javax.jws.WebMethod annotation (see 7.5.2).

- All of its methods may throw java.rmi.RemoteException in addition to any service-specific exceptions.

- All method parameters and return types must be compatible with the JAXB 2.0 Java to XML Schema mapping definition.

- A method parameter or return value type must not implement the java.rmi.Remote interface either directly or indirectly.

Here is an example of a a simple endpoint implementation class `AddNumbersImpl.java` from the fromjava sample:

    package fromjava.server;

    import javax.jws.WebService;

    @WebService
    public class AddNumbersImpl {
        /**
         * @param number1
         * @param number2
         * @return The sum
         * @throws AddNumbersException if any of the numbers to be added is
         * negative.
         */
        public int addNumbers(int number1, int number2) throws
                AddNumbersException {
            if (number1 < 0 || number2 < 0) {
                throw new AddNumbersException("Negative number cant be " +
                        "added!", "Numbers: " + number1 + ", " + number2);
            }
            return number1 + number2;
        }
    }

If you are familiar with JAX-RPC 1.1, you will notice that this implementation class does not implement a service endpoint interface. In JAX-WS RI 2.2.6 a service endpoint interface is no longer required.

When starting from a Java endpoint implementation class, it is recommended that the portable artifacts be generated from source using apt. This because the JAX-WS tools will then have full access to the source code and will be able to utilize parameter names that are otherwise not available through the Java reflection APIs. If the source for the endpoint implementation class is not available, the portable artifacts can be generated using wscompile. Here is a sample apt Ant task from the samples:

    <apt
            debug="${debug}"
            verbose="${verbose}"
            destdir="${build.classes.home}"
            sourcedestdir="${build.classes.home}"
            sourcepath="${basedir}/src">

        <classpath refid="jax-ws.classpath"/>
        <option key="r" value="${build.home}"/>
        <source dir="${basedir}/src">
            <include name="**/server/*.java"/>
        </source>
    </apt>

More information about the apt Ant task can be found apt. If this task is run on the fromjava sample, the output would include:

    AddNumbers.class
    AddNumbers.java
    AddNumbersExceptionBean.class
    AddNumbersExceptionBean.java
    AddNumbersResponse.class
    AddNumbersResponse.java

The `AddNumbersImplService.wsdl` file describes the web service. The `schema1.xsd` file is imported by the `AddNumbersImplService.wsdl` and contains the datatypes used by the web service. The `AddNumbers.class`/`AddNumbers.java` files contain the a bean used by a JAXB to marshall/unmarshall the `addNumbers` request. The `AddNumbersExceptionBean.class`/`AddNumbersExceptionBean.java` file is a bean used by JAXB to marshall the contents of the `AddNumbersException` class. The `AddNumbersResponse.class`/`AddNumbersResponse.java` files represent the response bean used by JAXB to marshall/unmarshall the `addNumbers` response.

##### 1.3.1.3. Create a WAR file to deploy

Creating a WAR file is nothing more than packaging the service endpoint interface (if there is one), service endpoint implementation, Java classes used by the endpoint implementation and a deployment descriptor in WAR format. For the fromjava sample the `AddNumbersImpl` and `AddNumbersException` classes in the fromjava.server package, and the deployment descriptor are bundled together to make a raw WAR file. To learn more about creating a WAR file and the deployment descriptor, see WAR File Packaging. The deployment descriptor used in fromjava sample is given below and can be found here:

    <?xml version="1.0" encoding="UTF-8"?>
    <endpoints xmlns='http://java.sun.com/xml/ns/jax-ws/ri/runtime'
            version='2.0'>
        <endpoint name='fromjava'
                implementation='fromjava.server.AddNumbersImpl'
                url-pattern='/addnumbers'/>
    </endpoints>

The attributes of the `<endpoint>` element are described below:

- name is simply an identifier for this endpoint

- implementation is used to specify the endpoint implementation class

- urlpattern is used to URL pattern used to access this endpoint.

The structure of the raw WAR file is shown below:

    META-INF/MANIFEST.MF
    WEB-INF/sun-jaxws.xml
    WEB-INF/web.xml
    WEB-INF/classes/fromjava/server/AddNumbersException.class
    WEB-INF/classes/fromjava/server/AddNumbersImpl.class
    WEB-INF/classes/fromjava/server/jaxws/AddNumbers.class
    WEB-INF/classes/fromjava/server/jaxws/AddNumbersExceptionBean.class
    WEB-INF/classes/fromjava/server/jaxws/AddNumbersResponse.class

The WAR file created can now be published on a JAX-WS RI enabled servlet container such as the Sun Java System Application Server Platform Edition 8.2

##### 1.3.1.4. Starting from a WSDL File

The basic process for deploying a web service when starting from a WSDL document consists of the following four steps:

1. Generate a service endpoint interface.

2. Implement the service endpoint interface.

3. Create a WAR file to deploy.

##### 1.3.1.5. Generate a Service Endpoint Interface

This step involves compiling or importing the WSDL file to generate a service endpoint interface and value classes mapped from imported XML schemas.

Below is a sample wsimport Ant target:

    <wsimport
            debug="${debug}"
            verbose="${verbose}"
            keep="${keep}"
            destdir="${build.classes.home}"
            wsdl="${server.wsdl}">

        <binding dir="${basedir}/etc"
                includes="${server.binding}"/>
    </wsimport>

Its commandline equivalent is:

    wsimport.sh etc/AddNumbers.wsdl -b custom-server.xml

Lets look at the excerpt of AddNumbers.wsdl from the sample fromwsdl:

The generated service endpoint interface looks as follows:

    package fromwsdl.server;

    @javax.jws.WebService(
            name = "AddNumbersPortType",
            serviceName = "AddNumbersService",
            targetNamespace = "http://duke.example.org")
    @javax.jws.soap.SOAPBinding(
            style = javax.jws.soap.SOAPBinding.Style.DOCUMENT,
            use = javax.jws.soap.SOAPBinding.Use.LITERAL,
            parameterStyle = javax.jws.soap.SOAPBinding.ParameterStyle.WRAPPED)
    public interface AddNumbersPortType extends java.rmi.Remote {
        @javax.jws.WebMethod(operationName = "addNumbers")
        @javax.jws.WebResult(name = "return")
        public int addNumbers(@javax.jws.WebParam(name = "arg0") int arg0,
                              @javax.jws.WebParam(name = "arg1") int arg1)
                throws fromwsdl.server.AddNumbersFault_Exception, java.rmi.RemoteException;
    }

The generated service endpoint interface has annotations that can be used by the future versions of JAX-WS 2.0 to do dynamic binding and serialization/deserialization at runtime. Alternatively this service endpoint interface can be used to generate a WSDL and schema file. Please note that round-tripping is not guaranteed in this case. So the generated WSDL file and schema may not be the same as the one the service endpoint interface was generated from.

##### 1.3.1.6. Implement the Service Endpoint Interface

The next thing to do will be to provide the implementation of the service endpoint interface generated in the previous step. When you implement the service endpoint interface it is necessary to provide a `@WebService` annotation on the implementation class with a endpointInteface element specifying the qualified name of the endpoint interface class. Let's look at the implementation class fromwsdl.server.AddNumbersImpl.java from the sample application fromwsdl:

    package fromwsdl.server;

    @WebService(endpointInterface = "fromwsdl.server.AddNumbersPortType")
    public class AddNumbersImpl implements AddNumbersPortType {
        /**
         * @param number1
         * @param number2
         * @return The sum
         * @throws AddNumbersException if any of the numbers to be added is
         * negative.
         */
        public int addNumbers(int number1, int number2) throws
                AddNumbersFault_Exception {
            ...
        }
    }

##### 1.3.1.7. Create a WAR

This step is similar to the one described above in Create a WAR file to deploy .

Here the service endpoint interface implementation class from previous step, together with a deployment descriptor file sun-jaxws.xml, and `web.xml` should be bundled together with the service endpoint interface, value classes generated in the first step mentioned in Generate a Service Endpoint Interface.

Let's look at sun-jaxws.xml from the sample application fromwsdl:

    <?xml version="1.0" encoding="UTF-8"?>
    <endpoints xmlns="http://java.sun.com/xml/ns/jax-ws/ri/runtime"
            version="2.0">
        <endpoint name="fromwsdl"
                interface="fromwsdl.server.AddNumbersPortType"
                implementation="fromwsdl.server.AddNumbersImpl"
                wsdl="WEB-INF/wsdl/AddNumbers.wsdl"
                service="{http://duke.example.org}AddNumbersService"
                port="{http://duke.example.org}AddNumbersPort"
                url-pattern="/addnumbers"/>
    </endpoints>

It defines the deployment-related configuration information for the fromwsdl endpoint. You will notice that this deployment descriptor contains additional attributes than the deployment descriptor described in Create a WAR file to deploy. The interface attribute references the service endpoint interface generated in step 1. The wsdl attribute also points at the WSDL that was imported by wsimport. The service attribute references which service in the WSDL this endpoint is from and the port is the name of the port in that service for this endpoint.

To learn more about creating a WAR file and the deployment descriptor, see WAR File Packaging.

The WAR file created can now be published on a JAX-WS RI enabled servlet container such as the Sun Java System Application Server Platform Edition 8.2

##### 1.3.1.8. J2SE Endpoints

Endpoints can be created and published programmatically using `javax.xml.ws.Endpoint` API in J2SE. To learn more about these endpoints, see Endpoint API.

#### 1.3.2. Client

A client application can access a remote web service endpoint in one of two ways: port and dispatch.

##### 1.3.2.1. Dynamic Proxy

In this approach client side invokes Web services via a dynamic proxy. The proxies for the Web Service are created from the generated Service and service endpoint interfaces. Once the proxies are created. the client application can invoke methods on those proxies just like a standard implementation of those interfaces. The sections below describe this process more detail.

##### 1.3.2.2. Generate Client Artifacts

The wsimport tool is used to generate the service endpoint interface and the service interface classes. Below is the sample wsimport Ant target:

    <wsimport
            debug="${debug}"
            verbose="${verbose}"
            keep="${keep}"
            destdir="${build.classes.home}"
            wsdl="${client.wsdl}">
        <classpath>
            <path refid="jax-ws.classpath"/>
            <pathelement location="${build.classes.home}"/>
        </classpath>
        <binding dir="${basedir}/etc" includes="${client.binding}"/>
    </wsimport>

The command line equivalent of this Ant target is:

    wsimport.sh -classpath client_classpath -d dest_dir -s src_dir \
        -b custom-client.xml http://localhost:8080/jax-ws-fromwsdl/addnumbers?WSDL

For more details see the wsimport documentation.

Here is the excerpt from fromwsdl.client.AddNumbersClient.java in the fromjava sample application:

    //get the port
    AddNumbersPortType port = new AddNumbersService().getAddNumbersPort();

    //invoke the remote method
    int result = port.addNumbers(10, 20);

##### 1.3.2.3. Dispatch

The `Dispatch` API is intended for advanced XML developers who prefer using XML constructs at the `java.lang.transform.Source` or `javax.xml.soap.SOAPMessage` level. For added convenience use of `Dispatch` with JAXB data binding object is supported. With the `XML/HTTP` binding a `javax.activation.DataSource` can also be used. The `Dispatch` APIs can be used in both `Message` and `Payload` modes. The `Dispatch` API client with an `XML/HTTP` binding can be used with REST Web Services. Please see the restful sample program for more information.

For more information on `Dispatch` in JAX-WS RI 2.2.6 please refer to Dispatch.

### 1.4. Useful Information

Annotation Processing Tool (apt) – http://java.sun.com/j2se/1.5.0/docs/guide/apt/jax-ws-ri-overview.

Please use the JAXB and JAX-WS forum for feedback.

The JAX-WS project on Java.net is: http://jax-ws.java.net.

## 2. Provider

Web Service endpoints may choose to work at the XML message level by implementing the `Provider` interface. This is achieved by implementing either `Provider<Source>` or `Provider<SOAPMessage>` or `Provider<DataSource>`. The endpoint accesses the message or message payload using this low-level, generic API. All the Provider endpoints must have `@WebServiceProvider` annotation. The `@ServiceMode` annotation is used to convey whether the endpoint wants to access the message ( `Service.Mode.MESSAGE`) or payload ( `Service.Mode.PAYLOAD`). If there is no `@ServiceMode` annotation on the endpoint, payload is the default value. The endpoint communicates with handlers using `WebServiceContext resource like any other normal endpoint`. Provider endpoints can start from java or WSDL. When the provider endpoints start from a WSDL file, `<provider>` WSDL customization can be used to mark a port as a provider.

### 2.1. `Provider<Source>` and `PAYLOAD`

An endpoint can access only the payload of a request using `Service.Mode.PAYLOAD` in the `@ServiceMode` annotation. This is the default behaviour, if the annotation is missing.

For example:

    @WebServiceProvider
    public class ProviderImpl implements Provider<Source> {
        public Source invoke(Source source) { // do request processing Source
            response = ...;
            return response;
        }
    }

### 2.2. `Provider<SOAPMessage>` and `MESSAGE`

An endpoint can access an entire SOAP request as a `SOAPMessage`. `Service.Mode.MESSAGE` in the `@ServiceMode` annotation is used to convey the intent.

For example:

    @WebServiceProvider
    @ServiceMode(value = Service.Mode.MESSAGE)
    public class ProviderImpl implements Provider<SOAPMessage> {
        public SOAPMessage invoke(SOAPMessage msg) { // do request processing
            SOAPMessage response =...;
            return response;
        }
    }

### 2.3. `Provider<Source>` and `MESSAGE`

An endpoint can access a request as a `Source`. If the request is a `SOAPMessage`, only the `SOAPPart` (no attachments) of the message is passed as `Source` to the `invoke` method. If the returned response is null, it is considered a one way MEP.

For example:

    @ServiceMode(value = Service.Mode.MESSAGE)
    public class ProviderImpl implements Provider<Source> {
        public Source invoke(Source source) { // do request processing
            using source // return null to indicate oneway return null;
        }
    }

### 2.4. WSDL Customization

If the provider endpoint starts with a WSDL file, a port can be customized to a provider endpoint using the `<provider>` customization. wsimport won't generate any artifacts for that port.

For example:

    <?xml version="1.0" encoding="UTF-8" standalone="yes"?>
    <bindings
            ...
            wsdlLocaption="AddNumbers.wsdl"xmlns="http://java.sun.com/xml/ns/jaxws">
        <bindings node="wsdl:definitions">
            <package name="provider.server"/>
            <provider>true</provider>
        </bindings>
    </bindings>

### 2.5. The `sun-jaxws.xml` file

The attributes of provider endpoint in sun-jaxws.xml: name, implementation, wsdl, service, port override the attributes provided through `@WebServiceProvider` annotation. For SOAP1.2 binding, one needs to specify binding attribute.

For example:

    <?xml version="1.0" encoding="UTF-8"?>
    <endpoints xmlns='http://java.sun.com/xml/ns/jax-ws/ri/runtime'
            version='2.0'>
        <endpoint name='AddNumbers'
                implementation='provider.server.AddNumbersImpl'
                wsdl='WEB-INF/wsdl/AddNumbers.wsdl'
                service='{http://duke.example.org}AddNumbersService'
                port='{http://duke.example.org}AddNumbersPort'
                url-pattern='/addnumbers'/>
    </endpoints>

If the wsdl, service, port are not specified in sun-jaxws.xml, then should be declared in the `@WebServiceProvider` annotation in implementation class.

### 2.6. Provider and Binding

Provider endpoint can be configured for different bindings using binding ids. These binding ids are defined in JAX-WS API and endpoint can be configured by specifying `@BindingType` annotation or using binding attribute in sun-jaxws.xml. sun-jaxws.xml overwrites binding defined by `@BindingType` annotation. If the binding is not specified using `@BindingType` or in `sun-jaxws.xml`, the default binding is SOAP1.1/HTTP.

For example: To specify `XML/HTTP` binding using `@BindingType` annotation

    @ServiceMode(value = Service.Mode.MESSAGE)
    @BindingType(value = HTTPBinding.HTTP_BINDING)
    public class ProviderImpl implements Provider<Source> {
        public Source invoke(Source source) {
            // ...
        }
    }

For example: To specify `XML/HTTP` binding in `sun-jaxws.xml`

    <?xml version="1.0" encoding="UTF-8"?>
    <endpoints xmlns='http://java.sun.com/xml/ns/jax-ws/ri/runtime'
            version='2.0'>
        <endpoint
                ...
                binding="http://www.w3.org/2004/08/wsdl/http"/>
    </endpoints>

### 2.7. RESTful Provider endpoints

RESTful Web Services can be built using `XML/HTTP` binding based `Provider` endpoints. In this case, even HTTP GET requests are passed to the endpoint. `Endpoint` can get necessary HTTP request query string and path information using standard `MessageContext.QUERY_STRING` and `MessageContext.PATH_INFO`. For more details on endpoint implementation, see the restful sample. If the endpoint expects GET requests to contain extra path after the endpoint address, then `url-pattern` should have "`/*`" at the end in both `sun-jaxws.xml` and `web.xml`.

For example: `sun-jaxws.xml`

    <?xml version="1.0" encoding="UTF-8"?>
    <endpoints xmlns='http://java.sun.com/xml/ns/jax-ws/ri/runtime'
            version='2.0'>
        <endpoint
                ...
                binding="http://www.w3.org/2004/08/wsdl/http"
                url-pattern="/addnumbers/*"/>
    </endpoints>

For example: `web.xml`

    <web-app>

        ...

        <servlet-mapping>
            <servlet-name>provider</servlet-name>
            <url-pattern>/addnumbers/*</url-pattern>
        </servlet-mapping>

        ...

    </web-app>

### 2.8. Provider and Handlers

Handlers can be configured with Provider endpoints in `sun-jaxws.xml` descriptor or by putting `@HandlerChain` on the `Provider` implementation. For more information, see handler config.

For example:

    <?xml version="1.0" encoding="UTF-8"?>
    <endpoints xmlns='http://java.sun.com/xml/ns/jax-ws/ri/runtime'
            xmlns:javaee="http://java.sun.com/xml/ns/javaee" version='2.0'>
        <endpoint name='AddNumbers'
                implementation='provider.server.AddNumbersImpl'
                wsdl='WEB-INF/wsdl/AddNumbers.wsdl'
                service='{http://duke.example.org}AddNumbersService'
                port='{http://duke.example.org}AddNumbersPort'
                url-pattern='/addnumbers'/>
        <javaee:handler-chain>
            <javaee:handler-chain-name>my handler</javaee:handler-chain-name>
            <javaee:handler>
                <javaee:handler-name>MyHandler</javaee:handler-name>
                <javaee:handler-class>provider.server.MyHandler
                </javaee:handler-class>
            </javaee:handler>
        </javaee:handler-chain>
    </endpoints>

## 3. AsyncProvider

Web Service endpoints may choose to work at the XML message level by implementing the `Provider` interface. The related information about `Provider` endpoints is documented in Provider page. However `Provider` endpoints are synchronous i.e. they receive XML requests and they return XML responses synchronously in `invoke()` method. If the endpoint wants to spawn a thread to process the request, it would block the jax-ws runtime thread and has to manage all the low details synchronizing the threads when the response is available. Also blocking a thread doesn't really scale well especially when the underlying transport is capable of handling asynchronous request and responses. RI provides an implemention specific solution to this problem by introducing `AsyncProvider.` This is similar to `Provider` endpoints but the difference is that the endpoint implementations have to implement `AsyncProvider` interface.

### 3.1. `AsyncProvider` Example

The following example shows an `AsyncProvider` example that accesses the payload of the request.

    @WebServiceProvider
    public class AsyncProviderImpl implements AsyncProvider<Source> {

        public void invoke(Source source, AsyncProviderCallback cbak,
                           WebServiceContext ctxt) {

            // ...

        }

    }

### 3.2. `AsyncProvider` sample

See a sample that illustrates `AsyncProvider` endpoints.

### 3.3. `AsyncService` sample

See another sample that illustrates `AsyncProvider` endpoint that uses asynchronous servlet as the transport to bring true asynchronity on the server-side. See New Asynchronous Servlet Transport in JAX-WS RI for mroe details on this feature.

## 4. Dispatch

Web service client applications may choose to work at the XML message level by using the `Dispatch<T>` APIs. The `javax.xml.ws.Dispatch<T>` interface provides support for the dynamic invocation of service endpoint operations.

Four Message Exchange Protocols(MEP) are supported: request-response, one way, asynchronous polling, and callback. Each of these invocation MEPs are required with JAXB data bound `java.lang.Object`, `javax.xml.transform.Source`, `javax.xml.soap.SOAPMessage` and `javax.activation.DataSource` object requests.

The `javax.xml.ws.Service` acts as a factory for the creation of `Dispatch<T>` instances. In addition, a `Dispatch<T>` instance is created in either `Service.Mode.PAYLOAD` or `Service.Mode.MESSAGE` modes. A `javax.xml.soap.SOAPMessage` request can only be used with a `Dispatch<T>` instance of `Service.Mode.MESSAGE` and using the SOAP Binding. A `javax.activation.DataSource` request can only be used with a `Dispatch<T>` instance of `Service.Mode.MESSAGE` and using the XML/HTTP Binding.

Note that the `Dispatch<T>` instance simply acts as a conduit for the request. No validation of the message is required to be performed by the implementation, though some may catch errors during request processing. It is up to the client program to supply well-formed XML requests.

### 4.1. Programming Model

#### 4.1.1. Create a dynamic `Service`.

The `javax.xml.ws.Service` acts as a factory for the creation of a dynamic `Service`. When created for use with `Dispatch<T>` APIs the `Service` created can be either a `Service` that has knowledge of the binding information of a known `Service` or no knowledge of any specific `Service`.

That is, when the `Service` is created with a WSDL file the port(s) binding ID, QName, and endpoint address are known to the `Service`.

The methods to create a dynamic `Service` are shown here:

    Service service = Service.create(QName serviceQName);
    Service service = Service.create(URL wsdlLocation, QName serviceQName);

A `Dispatch<T>` instance must be bound to a specific port and endpoint before use. The service has an `addPort(QName portName, URI bindingID, String endpointAddress)` method that the client program can invoke for `Dispatch<T>` objects. Ports created using this method can only be used with `Dispatch<T>` instances.

If the `Service` has been created with WSDL binding information the the port need not be added as the `Dispatch<T>` instance will be created specific for the binding information provided in the supplied WSDL file.

Developers who have used web service applications in the past are familiar with the port `QName` and endpoint address parameters of this method. JAX-WS RI 2.2.6 supports three `Binding` URI's, that of the SOAP 1.1, the SOAP 1.2 and XML/HTTP Binding. For more information on SOAP 1.2 support please refer to the SOAP 1.2 documents. For the XML/HTTP binding please see chapter 11 of the JAX-WS 2.0 PFD Specification.

The addition of the SOAP 1.1 port using the `Service` API is shown here:

    service.addPort(QName portName, String SOAPBinding.SOAP11HTTP_BINDING,
            String endpointAddress);

SOAP 1.2 support has been implemented for `Dispatch`. This requires only one change in the programming model. The addition of the SOAP 1.2 port using the `Service` API is shown here:

    service.addPort(QName portName, String SOAPBinding.SOAP12HTTP_BINDING,
            String endpointAddress);

XML/HTTP binding support has been implemented for `Dispatch`. The creation of the XML/HTTP port using the `Service` API is shown here:

    service.addPort(QName portName, String HTTPBinding.HTTP_BINDING,
            String endpointAddress);

#### 4.1.2. Create a `Dispatch<T>` instance.

The `Dispatch<T>` object can be created using either of these two `Service` methods:

    Dispatch dispatch = service.createDispatch(QName portName,
            Class clazz, Service.Mode mode);
    Dispatch dispatch = service.createDispatch(QName portName,
            JAXBContext jaxbcontext, Service.Mode mode);

For a `javax.xml.transform.Source` and JAXB data binding `java.lang.Object` `Dispatch<T>` can be created in both `Service.Mode.PAYLOAD` and `Service.Mode.MESSAGE` modes. A `javax.xml.soap.SOAPMessage` can only be created in `Service.Mode.MESSAGE` mode. The first form of the `createDispatch` method is used to create a `javax.xml.transform.Source` or `javax.xml.soap.SOAPMessage` specific to the `Dispatch<T>` instance.

A JAXB object-specific instance can only be created using the second method listed above.

It is important to note that once the `Dispatch<T>` instance is created it is static. That is, its `Service.Mode` or request type can not be changed. The instance can be reused given the caveat that if it is a JAXB-specific `Dispatch<T>` it must be reused with objects known to the same `JAXBContext`.

#### 4.1.3. Set the context `Map<String, Object>` for the request.

The `Dispatch<T>` interface extends the `javax.xml.ws.BindingProvider` interface. The `BindingProvider` interface defines accessor methods for the request and response context maps. Standard `BindingProvider` properties are defined by the JAX-WS 2.0 specification and the client program may set and get these properties. The application may also define application-specific properties, but the specification discourages this for portability reasons.

#### 4.1.4. Prepare the message request.

This is the client developer's responsibility. For examples of how to prepare specific request types refer to the `Dispatch<T>` sample applications.

#### 4.1.5. Invoke the web service request.

Four types of invocation MEPs are supported using the methods below. In methods that produce a response, the type of `Object` returned will be of the same type as the request. For example, a `SOAPMessage` request will return a `SOAPMessage` response.

    Object response = dispatch.invoke(T);
    dispatch.invokeOneway(T);
    Response<T> response = dispatch.invokeAsync(T);
    Future<?> response = dispatch.invokeAsync(T, AsyncHandler);

### 4.2. Dispatch and Asynchronous Invocations

Asynchronous invocations require special consideration. The first form of the `invokeAsync` method is a polling method. The response, `Response<T>`,returns to the user immediately and may be polled for completion. In the meantime, the client program can do other work.

The `javax.xml.ws.Response<T>` implements the `java.util.concurrent.Future<T>` interface that is included in J2SE 5.0. The `Response<T>` object returns the actual response via its `get` method, which blocks if the response is not ready to be returned.

The `Future<T>` interface also has a `cancel` method that will attempt to cancel the request invocation if the request is being invoked.

Faults returned from the service or exceptions thrown during the invocation are returned when the `Response<T>` `get` method is called. Because the execution doesn't occur in the main thread, the exception or fault returned is wrapped in an `java.util.concurrent.ExecutionException`. To obtain the actual cause use the `getCause` method of `ExecutionException`.

For more information on the `java.util.concurrent.Future<?>` interface see the J2SE 5.0 documentation.

    public interface Response<T> extends java.util.concurrent.Future<T> {

        Map<String, Object> getContext();

    }

The second form of the `invokeAsync` method has a second parameter of type `javax.xml.ws.AsyncHandler`. The purpose of the `AsyncHandler` is to get and handle the the response or any fault thrown in an application-specific way. The `AsyncHandler` has a method `handleResponse(Response<T>)` that takes a `javax.xml.ws.Response<T>` parameter. This method gets the response or any faults and processes them according to behavior defined in the application. Note that it is the responsibility of the client program to implement the asynchronous handler.

    class ResponseHandler implements javax.xml.ws.AsyncHandler {

        public handleResponse(Response<T>);

    }

This form of the asynchronous invocation method returns a `Future<?>` object with wildcard type. As in the asynchronous poll invocation, the `Future<T>` object can be polled to see if the response is ready. However, calling the `get` method will not return the response of the invocation, but an object of indeterminate type.

Examples of synchronous and asynchronous invocations are shown in the `Dispatch<T>` samples. For convenience an example of `Response<T>` usage is display here:

    Response<Source> response = dispatch.invokeAsync(Source);
    while (!response.isDone()) {
        //go off and do some work
    }

    try {
        //get the actual result
        Source result = (javax.xml.transform.Source) response.get();
        //do something with the result
    } catch (ExecutionException ex) {
        //get the actual cause
        Throwable cause = ex.getCause();
    } catch (InterupptedException ie) {
        //note interruptions
        System.out.println("Operation invocation interrupted");
    }

## 5. Asynchronous Client

This document describes how a client application can invoke a remote web service asynchronously. It can do so either by generating a static stub or using the Dispatch API.

### 5.1. Asynchronous Invocation Using Static Stub

Client application should apply `jaxws:enableAsyncMapping` binding declaration to the WSDL file to generate asynchronous method in the service endpoint interface. Please refer to Asynchrony for details on how this can be applied to the WSDL file.

Lets look at the following WSDL excerpt:

    <definitions
            name="AddNumbers"
            targetNamespace="http://duke.example.org"
            xmlns:tns="http://duke.example.org"
            xmlns="http://schemas.xmlsoap.org/wsdl/"
            xmlns:xsd="http://www.w3.org/2001/XMLSchema"
            xmlns:soap="http://schemas.xmlsoap.org/wsdl/soap/">

        ...

        <portType name="AddNumbersImpl">
            <operation name="addNumbers">
                <input message="tns:addNumbers"/>
                <output message="tns:addNumbersResponse"/>
            </operation>
        </portType>
        <binding name="AddNumbersImplBinding" type="tns:AddNumbersImpl">
            <soap:binding transport="http://schemas.xmlsoap.org/soap/http"
                    style="document"/>
            <operation name="addNumbers">
                <soap:operation soapAction=""/>
                <input>
                    <soap:body use="literal"/>
                </input>
                <output>
                    <soap:body use="literal"/>
                </output>
            </operation>
        </binding>

        ...

    </definitions>

In order to generate a service endpoint interface with asynchronous methods the following binding declaration file will be passed to wsimport:

    <bindings
            xmlns:xsd="http://www.w3.org/2001/XMLSchema"
            xmlns:wsdl="http://schemas.xmlsoap.org/wsdl/"
            wsdlLocaption="http://localhost:8080/jaxws-async/addnumbers?WSDL"
            xmlns="http://java.sun.com/xml/ns/jaxws">
        <bindings node="wsdl:definitions">
            <package name="async.client"/>
            <enableAsyncMapping>true</enableAsyncMapping>
        </bindings>
    </bindings>

It produces the following service endpoint interface (annotations are removed from the synchronous method for better readability):

    //synchronous method
    public int addNumbers(int number1, int number2) throws java.rmi.RemoteException;

    //async polling Method
    public Response<AddNumbersResponse> addNumbers(int number1, int number2);

    //async callback Method
    public Future<?> addNumbers(int number1, int number2, AsyncHandler<AddNumbersResponse>);

#### 5.1.1. Async Polling

    //async polling Method
    public Response<AddNumbersResponse> addNumbers(int number1, int number2);

Typically a client application will invoke the async polling operation on the stub and check for a response on the returned `Response` object. The response is available when `Response.isDone` returns true.

    javax.xml.ws.Response<AddNumbersResponse> resp = port
            .addNumbersAsync(10, 20);
    while (!resp.isDone()) {
        //do something
    }
    System.out.println("The sum is: " + resp.get().getReturn());

    ...

#### 5.1.2. Async Callback

    //async callback Method
    public Future<?> addNumbers(int number1, int number2, AsyncHandler<AddNumbersResponse>);

Here the client application provides an `AsyncHandler` by implementing the `javax.xml.ws.AsyncHandler<T>` interface.

    /**
     * Async callback handler
     */
    class AddNumbersCallbackHandler implements
            AsyncHandler<AddNumbersResponse> {
        private AddNumbersResponse output;

        /**
         * @see javax.xml.ws.AsyncHandler#handleResponse(javax.xml.ws.Response)
         */
        public void handleResponse(Response<AddNumbersResponse> response) {
            try {
                output = response.get();
            } catch (ExecutionException e) {
                e.printStackTrace();
            } catch (InterruptedException e) {
                e.printStackTrace();
            }
        }

        AddNumbersResponse getResponse() {
            return output;
        }
    }

The async handler is then passed as the last parameter of the async callback method:

    //instantiates the callback handler
    AddNumbersCallbackHandler callbackHandler = new
            AddNumbersCallbackHandler();

    //invoke the async callback method
    Future<?> resp = port.addNumbersAsync(number1, number2, callbackHandler);
    while (!resp.isDone()) {
        //do something
    }
    System.out.println("The sum is: " + callbackHandler.getResponse().getReturn());

### 5.2. Asynchronous Invocation Using Dispatch

For information on the Dispatch API and asynchronous invocations see Dispatch

## 6. Handler

### 6.1. Handler Types

JAX-WS 2.0 defines a `Handler` interface, with subinterfaces `LogicalHandler` and `SOAPHandler`. The `Handler` interface contains `handleMessage(C context)` and `handleFault(C context)` methods, where `C` extends `MessageContext`. A property in the `MessageContext` object is used to determine if the message is inbound or outbound. `SOAPHandler` objects have access to the full soap message including headers. Logical handlers are independent of protocol and have access to the payload of the message.

The new handler types can now be written without casting the message context object that is passed to them. For instance:

    public class MyLogicalHandler implements
            LogicalHandler<LogicalMessageContext> {

        public boolean handleMessage(LogicalMessageContext messageContext) {
            LogicalMessage msg = messageContext.getMessage();
            return true;
        }
        // other methods
    }

    public class MySOAPHandler implements SOAPHandler<SOAPMessageContext> {

        public boolean handleMessage(SOAPMessageContext messageContext) {
            SOAPMessage msg = messageContext.getMessage();
            return true;
        }
        // other methods
    }

A `close(C context)` method has been added that is called on the handlers at the conclusion of a message exchange pattern. This allows handlers to clean up any resources that were used for the processing of a request-only or request/response exchange.

The `init()` and `destroy()` methods of the handler lifecycle no longer exist. Instead, a method may be annotated with the `@PostConstruct` annotation to be called after the handler is created or the `@PreDestroy` annotation to be called before the handler is destroyed. Note that the annotated methods must return `void` and take no arguments:

    import javax.annotation.PostConstruct;
    import javax.annotation.PreDestroy;

    public class MyLogicalHandler implements
            LogicalHandler<LogicalMessageContext> {

        @PostConstruct
        public void methodA() {
        }

        @PreDestroy
        public void methodB() {
        }

        // other methods
    }

### 6.2. MessageContext

In the examples above, the `LogicalMessage` object allows a handler to get and set the message payload either as a JAXB object or as a `javax.xml.transform.Source`. The `SOAPMessage` object allows access to headers and the SOAP body of the message.

Both context objects extend `MessageContext`, which holds properties that the handlers can use to communicate with each other. A standard property `MessageContext.MESSAGE_OUTBOUND_PROPERTY` holds a `Boolean` that is used to determine the direction of a message. For example, during a request, the property would be `Boolean.TRUE` when seen by a client handler and `Boolean.FALSE` when seen by a server handler.

The message context object can also hold properties set by the client or provider. For instance, port proxy and dispatch objects both extend `BindingProvider`. A message context object can be obtained from both to represent the request or response context. Properties set in the request context can be read by the handlers, and the handlers may set properties on the message context objects passed to them. If these properties are set with the scope `MessageContext.Scope.APPLICATION` then they will be available in the response context to the client. On the server end, a context object is passed into the `invoke` method of a `Provider`.

### 6.3. Handler Chain Configuration

#### 6.3.1. Handler Files

Starting from a WSDL file, handler chain configuration is through WSDL customizations as defined by JSR 109. A `<handler-chains>` element is added to the customization file. The following is a simple handler chain with one handler (customization may be on server or client side):

    <-- excerpt from customization file -->
    <bindings xmlns="http://java.sun.com/xml/ns/jaxws">
        <handler-chains xmlns="http://java.sun.com/xml/ns/javaee">
            <handler-chain>
                <handler>
                    <handler-class>fromwsdl.handler_simple.common.TestHandler
                    </handler-class>
                </handler>
            </handler-chain>
        </handler-chains>
    </bindings>

Multiple `handler-chain` elements may exist within the `handler-chains` element. These may optionally use a service name, port name, or protocol pattern in their description to apply some chains to certain ports and protocols and not to others. For instance (note the wildcard character used in the service name):

    <-- excerpt -->
    <handler-chains xmlns="http://java.sun.com/xml/ns/javaee">
        <handler-chain>
            <service-name-pattern xmlns:ns1="urn:namespace">ns1:My*Service
            </service-name-pattern>
            <handler>...</handler>
        </handler-chain>

        <handler-chain>
            <port-name-pattern xmlns:ns1="urn:namespace">ns1:HelloPort
            </port-name-pattern>
            <handler>...</handler>
        </handler-chain>

        <handler-chain>
            <protocol-bindings>##SOAP11_HTTP</protocol-bindings>
            <handler>...</handler>
        </handler-chain>
    </handler-chains>

Handlers will appear in the final handler chain in the order that they are included in the customization file. However, logical handlers will be sorted out and called before protocol handlers during execution.

Starting from a Java class, annotations are used to describe the handler chain as defined by JSR 181. The following example uses the `@HandlerChain` annotation to refer to a file describing the chain.

    import javax.jws.HandlerChain;
    import javax.jws.WebService;

    @WebService
    @HandlerChain(file = "handlers.xml")
    public class MyServiceImpl {
        // implementation of class
    }

An example `handlers.xml` file is shown below. The schema is the same that is used for the customization.

    <?xml version="1.0" encoding="UTF-8"?>
    <jws:handler-chains xmlns:jws="http://java.sun.com/xml/ns/javaee">
        <jws:handler-chain>
            <jws:handler>
                <jws:handler-class>fromjava.handler_simple.common.TestHandler
                </jws:handler-class>
            </jws:handler>
        </jws:handler-chain>
    </jws:handler-chains>

When packaging the service, the `handlers.xml` file must be in the classpath within the WAR file, either directly under `WEB-INF/classes` or further down in the same package as the service class file.

On the server side, the handlers may be configured in the `sun-jaxws.xml`deployment descriptor as well. A handler chain specified here will override handlers in WSDL customizations or annotated classes. The schema for the handler section is the same as in the previous examples:

    <endpoints ...>
        <endpoint...>
            <handler-chains xmlns="http://java.sun.com/xml/ns/javaee">
                <handler-chain>
                    ...
                </handler-chain>
            </handler-chains>
        </endpoint>
    </endpoints>

#### 6.3.2. Programmatic Case

Handler chains may be configured on the client side at runtime by setting a chain directly on a `BindingProvider` (e.g., a `Dispatch` object or a port proxy) or by using a `HandlerResolver`. This example shows how to add a handler chain to a port proxy:

    // given proxy interface HelloPortType
    HelloPortType myProxy = // create proxy

    Binding binding = ((BindingProvider) myProxy).getBinding();

    // can create new list or use existing one
    List<Handler> handlerList = binding.getHandlerChain();

    handlerList.add(new MyHandler());
    binding.setHandlerChain(handlerList);

To configure the handlers that are added to newly created `Binding` objects, add a handler resolver to the service with `setHandlerResolver()`. The new resolver will be used whenever a `BindingProvider` is created from the service. An example resolver is as follows:

    /*
     * Add handlers to the returned list based on the information
     * in info.getBindingID(), getPortName(), and/or getServiceName().
     */
    public class MyResolver implements HandlerResolver {

        public List<Handler> getHandlerChain(PortInfo info) {
            List<Handler> handlers = new ArrayList<Handler>();
            // add handlers to list based on PortInfo information
            return handlers;
        }

    }

A resolver that modifies the initially configured handler chains could be written by calling `service.getHandlerResolver()` and passing the original resolver to a new one:

    // original HandlerResolver passed in constructor or setter method
    public List<Handler> getHandlerChain(PortInfo info) {
        List<Handler> handlers = originalResolver.getHandlerChain(info);
        // alter list based on PortInfo information
        return handlers;
    }

### 6.4. Handler Samples

The fromjavahandler and fromwsdlhandler samples set a `SOAPHandler` on the client and server. This handler simply outputs the contents of the SOAP message and can be used to see the requests and responses being passed back and forth. See the sample documentation for information on running the samples.

## 7. MTOM and Swaref

### 7.1. MTOM and XOP

MTOM (Message Transmission and Optimization Mechanism) together with XOP (XML Binary Optimized Packaging) defines how an XML binary data such as `xs:base64Binary` or `xs:hexBinary` can be optimally transmitted over the wire. XML type, such as `xs:base64Binary` is sent in lined inside the SOAP envelope. This gets quite in-efficient when the data size is more, for example a SOAP endpoint that exchanges images/songs etc. MTOM specifies how XOP packaging can be used to send the binary data optimally.

### 7.2. MTOM in JAX-WS 2.0

MTOM feature is disabled in JAX-WS by default. It can be enabled on the client and server. Once enabled all the XML binary data, XML elements of type `xs:base64Binary` and `xs:hexBinary` is optimally transmitted. Currently MTOM works only with proxy port.

#### 7.2.1. `xmime:expectedContentType` to Java type mapping

An schema element of type `xs:bas64Binary` or `xs:hexBinary` can be annotated by using attribute reference using `xmime:expectedContentType` JAXB 2.0 specification defines `xmime:expectedContentType` to Java type mapping in Table 2, “`xmime:expectedContentType` to Java type mapping”. Here is this table:

Table 2. `xmime:expectedContentType` to Java type mapping

MIME Type | Java Type
--- | ---
`image/gif` | `java.awt.Image`
`image/jpeg` | `java.awt.Image`
`text/plain` | `java.lang.String`
`text/xml` or `application/xml` | `javax.xml.transform.Source`
`*/*` | `javax.activation.DataHandler`

    <element name="image" type="base64Binary"/>

is mapped to `byte[]`

    <element name="image" type="base64Binary"
            xmime:expectedContentTypes="image/jpeg"
            xmlns:xmime="http://www.w3.org/2005/05/xmlmime"/>

is mapped to `java.awt.Image`

#### 7.2.2. `xmime:contentType` schema annotation

`xmime:contentType` schema annotation indicates the content-type of an XML element content whose type is `xs:base64Binary` or `xs:hexBinary`. The value of the attribute is a valid `content-type` string (e.g., "`text/xml; charset=utf-16`"). This attribute specifies the `content-type` of the element content on which it occurs. This annotation can be primarily used to indicate the `Content-Type` of binary data.

For example the schema type

    <element name="TestMtomXmimeContentType" type="types:PictureType"/>
    <complexType name="PictureType">
        <simpleContent>
            <restriction base="xmime:base64Binary">
                <attribute ref="xmime:contentType" use="required"/>
            </restriction>
        </simpleContent>
    </complexType>

Here `xmime:base64Binary` is defined by Describing Media Content of Binary Data in XML.

Gets mapped to PicutreType bean by wsimport:

     PictureType req = new PictureType();
    req.setValue(name.getBytes());
    req.setContentType("application/xml");

On the wire this is how it looks:

     <?xml version="1.0" encoding="UTF-8"?>
    <soapenv:Envelope xmlns:soapenv=" http://schemas.xmlsoap.org/soap/envelope/"
            xmlns:xsd=" http://www.w3.org/2001/XMLSchema"
            xmlns:ns1=" http://example.org/mtom/data"
            xmlns:ns2="http://www.w3.org/2005/05/xmlmime">
        <soapenv:Body>
            <ns1:TestMtomXmimeContentTypeResponse
                    ns2:contentType="application/xml">
                <xop:Include xmlns:xop="http://www.w3.org/2004/08/xop/include"
                        href="c id:193ed174-d313-4325-8eed-16cc25595e4e@example.org"/>
            </ns1:TestMtomXmimeContentTypeResponse>
        </soapenv:Body>
    </soapenv:Envelope>

#### 7.2.3. How to enable MTOM in JAX-WS 2.0

Enabling MTOM on Server:

- Enable using `@javax.xml.ws.soap.MTOM` annotation on the endpoint (SEI) implementation class

      @javax.xml.ws.soap.MTOM
      @WebService(endpointInterface = "mtom.server.Hello")
      public class HelloImpl implements Hello {
          // ...
      }

- MTOM can be also be enabled on an endpoint by specifying enable-mtom attribute to true on an endpoint element in sun-jaxws.xml deployment descriptor.

      <?xml version="1.0" encoding="UTF-8"?>
      <endpoints xmlns='http://java.sun.com/xml/ns/jax-ws/ri/runtime'
              version='2.0'>
          <endpoint name="Mtom"
                  implementation="mtom.server.HelloImpl"
                  url-pattern="/hello"
                  enable-mtom="true"/>
      </endpoints>

- Enable using `@BindingType` on the endpoint (SEI) implementation class

  - `@BindingType(value=javax.xml.ws.soap.SOAPBinding.SOAP11HTTP_MTOM_BINDING)` will enable MTOM on the deployed endpoint for SOAP 1.1 binding

  - `@BindingType(value=javax.xml.ws.soap.SOAPBinding.SOAP12HTTP_MTOM_BINDING)` will enable MTOM on the deployed endpoint for SOAP 1.2 binding

Enabling MTOM on Client:

- To enable MTOM on client-side, pass javax.xml.ws.soap.MTOMFeature as WebServiceFeature parameter while crating the Proxy or Dispatch. Here is the code snippet from the client MtomApp.java of the mtom sample:

  - Hello port = new HelloService().getHelloPort(new MTOMFeature()); gives a proxy with MTOM enabled

  - javax.xml.ws.Service.createDispatch(....,new javax.xml.ws.soap.MTOMFeature()) gives a Dispatch instance with MTOM enabled

- JAX-WS 2.0 specification has defined API to enable and to check if the MTOM is enabled.

  - javax.xml.ws.soap.SOAPBinding.setMTOMEnabled(boolean enable) - enable or disable MTOM.

  - javax.xml.ws.soap.SOAPBinding.isMTOMEnabled() - returns true if MTOM is enabled otherwise false.

      Hello port = new HelloService.getHelloPort();
      //get the binding and enable mtom
      SOAPBinding binding = (SOAPBinding) ((BindingProvider) port).getBinding();
      boolean mtomEnabled = binding.isMTOMEnabled();

      binding.setMTOMEnabled(true);

#### 7.2.4. Attach vs In-line

As defined by JAXB 2.0 specification `xs:base64Binary` and `xs:hexBinary` mapping to java is `byte[]`. JAX-WS implementation has set a threshold of 1KB of `byte[]` size. This threshold can be modified using implementation specific property `com.sun.xml.ws.developer.JAXWSProperties.MTOM_THRESHOLD_VALUE` in the `RequestContext` on the client side and in the `MessageContext` on the server side. If the `byte[]` that is being sent is less than this threshold (default is 1KB) then the binary data is base64 encoded by JAXB and in lined inside the SOAP Body otherwise the binary data is sent as attachment mime part in Multipart/Related package and XML infoset for the binary data is XOP encoded by JAXB

    <xop:Include href=...>

is used to reference the attachment. The XOP encoding and packaging is done as per described by the XOP packaging rules. The href is the the `Content-ID` of the attachment and is encoded as per CID URI scheme defined in RFC 2111. `xmime:contentType` attribute may appear on the element that includes binary data to indicate preferred media type as annotated on the corresponding schema.

##### 7.2.4.1. How to specify MTOM data Threshold

Default threshold value for MTOM feature is 0 bytes. You can set a threshold value for MTOM by using `@MTOM` annotation on server-side or using MTOMFeature on client-side. Let's say you set MTOM threshold as 3000, this serves as hint to JAX-WS when to send binary dat as attachments. In this case, JAX-WS will send any byte array in the message thats equal to or larger than 3KB as attachment and the corresponding XML infoset will be XOP encoded (will contain reference to this attachment)

- On Server-side, `@MTOM(threshold=3000)`

- On Client-side, pass `MTOMFeature(3000)` as `WebServiceFeature` as mentioned in Section 7.2.3, “How to enable MTOM in JAX-WS 2.0”, while creating the proxy/dispatch.

#### 7.2.5. MTOM Samples

Example 1. MTOM Sample - mtom

This is SOAP 1.1 MTOM SampleThis is how the JAX-WS generated XOP packaged SOAP message looks on the wire:

    Content-Type: Multipart/Related; start-info="text/xml"; type="application/xop+xml";
        boundary="----=_Part_0_1744155.1118953559416"
    Content-Length: 3453
    SOAPAction: ""

        ------=_Part_1_4558657.1118953559446
    Content-Type: application/xop+xml; type="text/xml"; charset=utf-8

    <soapenv:Envelope xmlns:soapenv="http://schemas.xmlsoap.org/soap/envelope/">
        <soapenv:Body>
            <Detail xmlns="http://example.org/mtom/data">
                <Photo>RHVrZQ==</Photo>
                <image>
                    <xop:Include
                            xmlns:xop="http://www.w3.org/2004/08/xop/include"
                            href="cid:5aeaa450-17f0-4484-b845-a8480c363444@example.org"/>
                </image>
            </Detail>
        </soapenv:Body>
    </soapenv:Envelope>

    ------=_Part_1_4558657.1118953559446
    Content-Type: image/jpeg
    Content-ID: <5aeaa450-17f0-4484-b845-a8480c363444@example.org>

     ╪
        α ►JFIF ☺☻ ☺ ☺ █ ♠♠
    ♀¶
    ♀♂♂♀↓↕‼☼¶↔→▼▲↔→∟∟
        $.' ",#∟∟(7),01444▼'9=82<.342 █ C☺ ♀♂♀↑↑2!∟!22222222222222222222222222222222222222222222

    222222 └ ) ¬♥☺" ☻◄☺♥◄☺ ─ ▼ ☺♣☺☺☺☺☺☺
        ☺☻♥♦ ♂ ─ ╡► ☻☺♥♥☻♦♥♣♣♦♦
        ☺}☺☻♥ ♦◄♣↕!1A♠‼Qa"q¶2?#B▒┴§R╤≡$3bré

    ▬↨↑↓→%&'()*456789:CDEFGHIJSTUVWXYZcdefghijstuvwxyzâäàåçêëèÆôöòûùÿÖÜóúñÑªº¿⌐¬▓│┤╡╢╖╕╣║┬├─┼╞╟╚╔╩╥╙╘╒╓╫╪┘┌ßΓπΣσµτΦΘΩ±≥≤⌠⌡÷≈°∙·
        ─

Above Photo is inlined binary data because its less than 1KB and image which is more than 1KB is sent as attachment. Here is the associated schema:

    <element name="Detail" type="types:DetailType"/>
    <complexType name="DetailType">
        <sequence>
            <!-- mapped to byte[] -->
            <element name="Photo" type="base64Binary"/>
            <!-- mapped tojava.awt.Image -->
            <element name="image" type="base64Binary"
                    xmime:expectedContentTypes="image/jpeg"/>
        </sequence>
    </complexType>

Example 2. MTOM Sample - mtom-soap12

This is SOAP 1.2 MTOM Sample. Here is how the JAX-WS generated soap message looks on the wire:

    <element name="image" type="base64Binary" xmime:expectedContentTypes="image/jpeg"/>

    Content-Type:
        Multipart/Related; start-info="application/soap+xml"; type="application/xop+xml";
        boundary="----=_Part_0_1744155.1118960238280"
    Content-Length: 1946
    SOAPAction: ""

    ------=_Part_1_4558657.1118960238320
    Content-Type: application/xop+xml; type="application/soap+xml"; charset=utf-8

    <soapenv:Envelope xmlns:soapenv="http://www.w3.org/2003/05/soap-envelope">
        <soapenv:Body>
            <Detail xmlns="http://example.org/mtom/data">
                <Photo>RHVrZQ==</Photo>
                <image>
                    <xop:Include
                            xmlns:xop="http://www.w3.org/2004/08/xop/include"
                            href="cid:42a7ee0a-20ee-426b-a135-094d72bc138f@example.org"/>
                </image>
            </Detail>
        </soapenv:Body>
    </soapenv:Envelope>

    ------=_Part_1_4558657.1118960238320
    Content-Type: application/octet-stream
    Content-ID: <42a7ee0a-20ee-426b-a135-094d72bc138f@example.org>

     ╪ α ►JFIF ☺☻ ☺ ☺ █ ♠♠
    ♀¶

        ♀♂♂♀↓↕‼☼¶↔→▼▲↔→∟∟
        $.' ",#∟∟(7),01444▼'9=82<.342 █ C☺ ♀♂♀↑↑2!∟!22222222222222222222222222222222222222222222

    222222 └ ' )♥☺" ☻◄☺♥◄☺ ─ ▼ ☺♣☺☺☺☺☺☺
        ☺☻♥♦ ♂ ─ ╡► ☻☺♥♥☻♦♥♣♣♦♦
        ☺}☺☻♥ ♦◄♣↕!1A♠‼Qa"q¶2?#B▒┴§R╤≡$3bré

    ▬↨↑↓→%&'()*456789:CDEFGHIJSTUVWXYZcdefghijstuvwxyzâäàåçêëèÆôöòûùÿÖÜóúñÑªº¿⌐¬▓│┤╡╢╖╕╣║┬├─┼╞╟╚╔╩╥╙╘╒╓╫╪┘┌ßΓπΣσµτΦΘΩ±≥≤⌠⌡÷≈°∙·
        ─
     ▼☺ ♥☺☺☺☺☺☺☺☺☺ ☺☻♥♦

### 7.3. swaRef

WS-I Attachment Profile 1.0 defines mechanism to reference MIME attachment parts using swaRef. In this mechanism the content of XML element of type `wsi:swaRef` is sent as MIME attachment and the element inside SOAP Body holds the reference to this attachment in the CID URI scheme as defined by RFC 2111.

#### 7.3.1. swaRef in JAX-WS 2.0

JAXB 2.0 defines mapping of `wsi:swaRef` schema type to javax.activation.DataHandler. An application will construct the DataHandler with the data and the appropriate MIME type and JAX-WS will coordinate with JAXB and SAAJ to send it as attachment MIME part.

#### 7.3.2. How to use swaRef

An XML element of type `wsi:swaRef` is mapped to a DataHandler and is sent as attachment over the wire. For example,

    <element name="claimForm" type="wsi:swaRef"
            xmlns:wsi="http://ws-i.org/profiles/basic/1.1/xsd"/>

will be sent over the wire as :

    Content-Type: Multipart/Related; start-info="text/xml"; type="application/xop+xml";
        boundary="----=_Part_4_32542424.1118953563492"
    Content-Length: 1193
    SOAPAction: ""

    ------=_Part_5_32550604.1118953563502
    Content-Type: application/xop+xml; type="text/xml"; charset=utf-8

    <soapenv:Envelope xmlns:soapenv="http://schemas.xmlsoap.org/soap/envelope/">
        <soapenv:Body>
            <claimForm xmlns="http://example.org/mtom/data">
                cid:b0a597fd-5ef7-4f0c-9d85-6666239f1d25@example.jaxws.sun.com
            </claimForm>
        </soapenv:Body>
    </soapenv:Envelope>

    ------=_Part_5_32550604.1118953563502
    Content-Type: application/xml
    Content-ID: <b0a597fd-5ef7-4f0c-9d85-6666239f1d25@example.jaxws.sun.com>

    <?xml version="1.0" encoding="UTF-8"?>
    <application xmlns="http://java.sun.com/xml/ns/j2ee"
            xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance"
            xsi:schemaLocaption="http://java.sun.com/xml/ns/j2ee
        http://java.sun.com/xml/ns/j2ee/application_1_4.xsd" version="1.4">
        <display-name>Simple example of application</display-name>
        <description>Simple example</description>
        <module>
            <ejb>ejb1.jar</ejb>
        </module>
        <module>
            <ejb>ejb2.jar</ejb>
        </module>
        <module>
            <web>
                <web-uri>web.war</web-uri>
                <context-root>web</context-root>
            </web>
        </module>
    </application>

#### 7.3.3. swaRef Sample

Refer to swaRef sample `testSwaRef()` method in MimeApp.java.

## 8. SOAP 1.2

### 8.1. Introduction

The default binding supported by JAX-WS 2.0 is SOAP 1.1 over HTTP. With this release we have added SOAP 1.2 binding over HTTP support into JAX-WS 2.0. This document describes how SOAP 1.2 binding can be applied to an endpoint and how it can be used on the client side in the case of proxy port. To enable SOAP 1.2 support in the `Dispatch` client please refer to the `Dispatch` documents.

### 8.2. SOAP 1.2 Endpoint

To enable SOAP 1.2 binding on an endpoint. You would need to set binding attribute value in sun-jaxws.xml to SOAP 1.2 HTTP binding value as specified by `javax.xml.ws.soap.SOAPBinding.SOAP12HTTP_BINDING` which is: "http://www.w3.org/2003/05/soap/bindings/HTTP/" or "http://java.sun.com/xml/ns/jaxws/2003/05/soap/bindings/HTTP/"

Here is the `sun-jaxws.xml` from fromjava-soap1.2 sample:

    <?xml version="1.0" encoding="UTF-8"?>
    <endpoints xmlns="http://java.sun.com/xml/ns/jax-ws/ri/runtime"
            version="2.0">
        <endpoint name="fromjava-soap12"
                implementation="fromjava_soap12.server.AddNumbersImpl"
                binding="http://java.sun.com/xml/ns/jaxws/2003/05/soap/bindings/HTTP/
                url-pattern="/addnumbers"/>
    </endpoints>

JAX-WS 2.0 generates WSDL on the fly when requested by a client. If this binding attribute is present and is equal to SOAP 1.2 HTTP binding WSDL with SOAP 1.2 binding is generated. Based on this binding descriptor JAX-WS runtime configures itself to handle SOAP 1.2 messages.

Notice that the binding id "http://java.sun.com/xml/ns/jaxws/2003/05/soap/bindings/HTTP/" is not a standard binding id. If you use SOAP 1.2 binding id "http://www.w3.org/2003/05/soap/bindings/HTTP/" defined by JAX-WS, still the endpoint is configured to use SOAP 1.2 binding, except that a wsdl will not be generated on the fly.

Alternatively, you can specify the binding through `@BindingType` annotation in the implementation class to use SOAP 1.2 binding. Here is an example from the fromjava_soap12 sample.

    @WebService
    @BindingType(value = "http://java.sun.com/xml/ns/jaxws/2003/05/soap/bindings/HTTP/")
    public class AddNumbersImpl {

        /**
         * @param number1
         * @param number2
         * @return The sum
         * @throws AddNumbersException if any of the numbers to be added is
         *                             negative.
         */
        public int addNumbers(int number1, int number2) throws
                AddNumbersException {
            if (number1 < 0 || number2 < 0) {
                throw new AddNumbersException("Negative number cant be added " +
                        "!", "Numbers: " + number1 + ", " + number2);
            }
            return number1 + number2;
        }

    }

The commandline wsgen and the equivalent ant task can be used to generate SOAP 1.1 (default) or SOAP 1.2 WSDL. The binding information should be passed using `-wsdl:protocol` switch.

### 8.3. Client

On the client there is nothing special that has to be done. JAX-WS runtime looks into the WSDL to determine the binding being used and configures itself accordingly. wsimport command line tool or wsimport ant task can be used to import the WSDL and to generated the client side artifacts.

### 8.4. Samples

There are 2 samples bundled with this release

- fromwsdl-soap12 - shows SOAP 1.2 endpoint developed starting from wsdl

- fromjava-soap12 - shows SOAP 1.2 endpoint developed starting from Java

A SOAP 1.2 message generated by JAX-WS:

    Content-Type: application/soap+xml; charset=utf-8
    Content-Length: 178
    SOAPAction: ""

    <soapenv:Envelope xmlns:soapenv="http://www.w3.org/2003/05/soap-envelope">
        <soapenv:Body>
            <addNumbers xmlns="http://duke.example.org">
                <arg0>-10</arg0>
                <arg1>20</arg1>
            </addNumbers>
        </soapenv:Body>
    </soapenv:Envelope>

A SOAP 1.2 Fault message generated by JAX-WS:

    Content-Type:application/soap+xml; charset=utf-8
    Content-Length: 476
    SOAPAction: ""

    <soapenv:Envelope xmlns:soapenv="http://www.w3.org/2003/05/soap-envelope">
        <soapenv:Body>
            <soapenv:Fault>
                <soapenv:Code>
                    <soapenv:Value>
                        soapenv:Sender
                    </soapenv:Value>
                </soapenv:Code>
                <soapenv:Reason>
                    <soapenv:Text xml:lang="en">
                        Negative number cant be added!
                    </soapenv:Text>
                </soapenv:Reason>
                <soapenv:Detail>
                    <AddNumbersFault xmlns="http://duke.example.org">
                        <faultInfo>Numbers: -10, 20</faultInfo>
                        <message>Negative number cant be added!</message>
                    </AddNumbersFault>
                </soapenv:Detail>
            </soapenv:Fault>
        </soapenv:Body>
    </soapenv:Envelope>

## 9. WSDL Customization

The JAX-WS 2.0 specification defines standard XML-based customization for WSDL to Java mapping and to control certain features. These customizations, or binding declarations, can customize almost all WSDL components that can be mapped to Java, such as the service endpoint interface class, method name, parameter name, exception class, etc. The other important thing you can do with these binding declarations is control certain features, such as asynchrony, provider, wrapper style, and additional headers. For example, a client application can enable asynchrony for a particular operation in a `portType` or all operations in a `portType` or all `portType` operations defined in the WSDL file.

The JAX-RPC 1.1 specification did not define a standard customization architecture. However JAX-RPC 1.x SI had limited WSDL to Java customization support. It allowed a JAX-RPC 1.x application to:

- Define a package where Java artifacts mapped from a WSDL file will be generated.

- Customize the package for the value classes mapped from the imported XML schema by the WSDL document.

- Customize handler chains.

But these customizations were not portable and could not be used across other JAX-RPC implementations. JAX-WS RI 2.2.6 provides complete support for all the binding declarations defined by the specification.

### 9.1. Declaring Customizations

All the binding declaration elements live in `http://java.sun.com/xml/ns/jaxws` namespace. There are two ways to specify binding declarations. In the first approach, all binding declarations pertaining to a given WSDL document are grouped together in a standalone document, called an external binding file. The second approach consists of embedding binding declarations directly inside a WSDL document. In either case, the `jaxws:bindings` element is used as a container for JAX-WS binding declarations. The `jaxws` prefix maps to the `http://java.sun.com/xml/ns/jaxws` namespace.

#### 9.1.1. External Binding Declaration

External binding files are semantically equivalent to embedded binding declarations. When wsimport processes the WSDL document for which there is an external binding file, it internalizes the binding declarations defined in the external binding file on the nodes in the WSDL document they target using the `wsdlLocation` attribute. The embedded binding declarations can exist in a WSDL file and an external binding file targeting that WSDL, but wsimport may give an error if, upon embedding the binding declarations defined in the external binding files, the resulting WSDL document contains conflicting binding declarations.

##### 9.1.1.1. Root Binding Element

The `jaxws:bindings` declaration appears as the root of all other binding declarations. This top-level `jaxws:bindings` element must specify the location of the WSDL file as a URI in the value of `wsdlLocation` attribute.

Its important that the `wsdlLocation` attribute on the root `jaxws:bindings` declaration is same as the WSDL location URI given to wsimport.

    <jaxws:bindings
            wsdlLocation="http://localhost:8080/jaxws-external-customize/addnumbers?WSDL"
            jaxws:xmlns="http://java.sun.com/xml/ns/jaxws">

        ...

    </jaxws:bindings>

##### 9.1.1.2. Child Binding Elements

The root `jaxws:bindings` element may contain child `jaxws:bindings` elements. In this case the child `jaxws:bindings` element must carry an XPath expression in the node attribute to refer to the WSDL node it customizes.

Here is an excerpt from an external binding file custom-client.xml in the `external-customize` sample:

    <jaxws:bindings
            wsdlLocation="http://localhost:8080/jaxws-external-customize/addnumbers?WSDL"
            jaxws:xmlns="http://java.sun.com/xml/ns/jaxws">
        <jaxws:bindings node="wsdl:definitions"
                xmlns:wsdl="http://schemas.xmlsoap.org/wsdl/">
            <jaxws:package name="external_customize.client"/>

            ...

        </jaxws:bindings>
    </jaxws:bindings>

In this example the child `jaxws:bindings` applies package customization. An XPath expression in the node attribute refers to the root node of the WSDL document, which is `wsdl:definitions` and declares the package `external_customize.client` for all the generated Java classes mapped from the WSDL file.

#### 9.1.2. Embedded Binding Declarations

Embedded binding declarations directly inside the WSDL follow different rules compared to the binding declarations declared in the external binding file. Here are some important facts and rules as defined in the JAX-WS 2.0 specification:

- An embedded binding declaration is specified by using the `jaxws:bindings` element as a WSDL extension inside the wsdl node that is to be customized.

- When a `jaxws:bindings` element is used as a WSDL extension, the `jaxws:bindings` element should not have node attribute (the node attribute is only used in external customization file to scope the custmization to a wsdl element).

- A binding declaration embedded in a WSDL can only affect the WSDL element it extends.

Here's an example of embedded binding declarations in the WSDL `AddNumbers.wsdl` from the `inline-customize` sample:

    <wsdl:portType name="AddNumbersImpl">
        <!-- wsdl:portType customizations -->
        <jaxws:bindings xmlns:jaxws="http://java.sun.com/xml/ns/jaxws">
            <!-- rename the generated SEI from AddNumbersImpl to MathUtil -->
            <jaxws:class name="MathUtil"/>
            ...
        </jaxws:bindings>
        <wsdl:operation name="addNumber">
            ...
        </wsdl:operation>
    </wsdl:portType>

The above WSDL file excerpt shows the `wsdl:portType` customization. `jaxws:bindings` appears as extension element of `portType`. It customizes the class name of the generated service endpoint interface. Without this customization, or by default, the service endpoint interface class is named after the `wsdl:portType` name. The binding declaration `jaxws:class` customizes the generated class to be named `MathUtil` instead of `AddNumberImpl`.

In the following section, all the possible standard customizations and their scope is described. Global customizations can be specified under <wsdl:definitions> element and other customizations can be specified under the node of its scope.

### 9.2. Standard Customizations

This section provides the details of all the possible WSDL binding declarations.

#### 9.2.1. Global bindings

The global customizations are the customizations that applies to the entire scope of `wsdl:definition` in the wsdl referenced by the root `jaxws:bindings@wsdlLocation.Following` customizations have the global scopes:

    <jaxws:package name="..."/>

    <jaxws:enableWrapperStyle/>

    <jaxws:enableAsyncMapping/>

These can appear as direct child of the Root Binding Element declarations in the external customization file. For example:

    <bindings xmlns:wsdl="http://schemas.xmlsoap.org/wsdl/"
            wsdlLocation="http://localhost:8080/jaxws-external-customize/addnumbers?WSDL"
            xmlns="http://java.sun.com/xml/ns/jaxws">

        <package name="external_customize.client"/>
        <enableWrapperStyle>true</enableWrapperStyle>
        <enableAsyncMapping>false</enableAsyncMapping>
    </bindings>

In embedded usage, the global customization can be specified under `<wsdl:definitions>` node of the wsdl.

#### 9.2.2. Package Customization

By default wscompile generates WSDL artifacts in a package computed from the WSDL `targetNamespace`. For example, a WSDL file with the `targetNamespace` `http://duke.example.org` without any package customization will be mapped to the `org.duke` package. To customize the default package mapping you would use a `jaxws:package` customization on the `wsdl:definitions` node or it can directly appear inside the top level bindings element.

An important thing to note is that `-p` option on commandline wsimport.sh tool (package attribute on wsimport ant task), overrides the `jaxws:package` customization,it also overrides the schema package customization specified using jaxb schema customization.

For example:

    <bindings xmlns:wsdl="http://schemas.xmlsoap.org/wsdl/"
            wsdlLocation="http://localhost:8080/jaxws-external-customize/addnumbers?WSDL"
            xmlns="http://java.sun.com/xml/ns/jaxws">
        <package name="external_customize.client">
            <javadoc>Mathutil package</javadoc>
        </package>

        ...

    </bindings>

or

    <bindings xmlns:wsdl="http://schemas.xmlsoap.org/wsdl/"
            wsdlLocation="http://localhost:8080/jaxws-external-customize/addnumbers?WSDL"
            xmlns="http://java.sun.com/xml/ns/jaxws">
        <bindings node="wsdl:definitions">
            <package name="external_customize.client">
                <javadoc>Mathutil package</javadoc>
            </package>

            ...

        </bindings>

        ...

    </bindings>

#### 9.2.3. Wrapper Style

wsimport by default applies wrapper style rules to the abstract operation defined in the `wsdl:portType`, and if an operation qualifies the Java method signature is generated accordingly. Wrapper style Java method generation can be disabled by using `jaxws:enableWrapperStyle`.

`jaxws:enableWrapperStyle` can appear on the toplevel bindings element (with `@wsdlLocation` attribute), it can also appear on the following target nodes:

- `wsdl:definitions` global scope, applies to all the `wsdl:operations` of all `wsdl:portType` attributes

- `wsdl:portType` applies to all the `wsdl:operations` in the `portType`

- `wsdl:operation` applies to only this `wsdl:operation`

For example:

    <bindings xmlns:wsdl="http://schemas.xmlsoap.org/wsdl/"
            wsdlLocation="http://localhost:8080/jaxws-external-customize/addnumbers?WSDL"
            xmlns="http://java.sun.com/xml/ns/jaxws">

        <!-- applies to wsdl:definitions node, that would mean the entire wsdl -->
        <enableWrapperStyle>true</enableWrapperStyle>
        <!-- wsdl:portType operation customization -->
        <bindings
                node="wsdl:definitions/wsdl:portType[@name='AddNumbersImpl']/wsdl:operation[@name='addNumbers']">
            <!-- change java method name from addNumbers() to add() -->
            <enableWrapperStyle>false</enableWrapperStyle>

            ...

        </bindings>

        ...

    </bindings>

In the example above the wrapper style is disabled for the `addNumbers` operation in `AddNumbersImpl` `portType` .This is because wsimport processes this binding in the following order: first `wsdl:operation`, then its parent `wsdl:portType`, and finally `wsdl:definitions`. Here `wsdl:operation` `addNumbers` has this customization disabled so this is what is applied by wsimport to generate a bare Java method signature.

#### 9.2.4. Asynchrony

A client application can use the `jaxws:enableAsyncMapping` binding declaration so that wsimport will generate async polling and callback operations along with the normal synchronous method when it compiles a WSDL file.

It has the same target nodes as the wrapper style binding declaration described above in section 2.2.

- `wsdl:definitions` or toplevel bindings element: global scope, applies to all the `wsdl:operations` of all `wsdl:portType`

- `wsdl:portType` applies to all the `wsdl:operations` in the `portType`

- `wsdl:operation` applies to only this `wsdl:operation`

Example :

    <bindings xmlns:wsdl="http://schemas.xmlsoap.org/wsdl/"
            wsdlLocation="http://localhost:8080/jaxws-external-customize/addnumbers?WSDL"
            xmlns="http://java.sun.com/xml/ns/jaxws">

        <!-- applies to wsdl:definitions node, that would mean the entire wsdl -->
        <enableAsyncMapping>false</enableAsyncMapping>
        <!-- wsdl:portType operation customization -->
        <bindings
                node="wsdl:definitions/wsdl:portType[@name='AddNumbersImpl']/wsdl:operation[@name='addNumbers']">
            <!-- change java method name from addNumbers() to add() -->
            <enableAsyncMapping>true</enableAsyncMapping>

            ...

        </bindings>

        ...

    </bindings>

In the above example wsimport will generate async polling and callback methods for the `addNumbers` operation. In the `wsdl:definition` node, the async customization is disabled or false but the `wsdl:operation` node has it enabled or true, and so wsimport generates the async methods of the `wsdl:operation` `addNumbers`.

This is how the generated signatures look (annotations are removed from synchronous method for reading simplicity):

    //synchronous method
    public int addNumbers(int number1, int number2)
            throws org.duke.AddNumbersFault_Exception, java.rmi.RemoteException;

    //async polling Method
    public Response<AddNumbersResponse> addNumbers(int number1, int number2);

    //async callback Method
    public Future<?> addNumbers(int number1, int number2,
                                AsyncHandler<AddNumbersResponse>);

    ...

#### 9.2.5. The Provider Interface

By default the value of `jaxws:provider` binding is false. That is, provider interface generation is disabled. In order to mark a port as provider interface this binding declaration should refer to the `wsdl:port` node using an XPath expression. Please note that provider binding declaration applies only when developing a server starting from a WSDL file.

#### 9.2.6. Class Customization

The generated class for `wsdl:portType`, `wsdl:fault`, `soap:headerfault`, and `wsdl:server` can be customized using the `jaxws:class` binding declaration. Refer to the external binding declaration file `custom-client.xml` in the `external-customize` sample.

##### 9.2.6.1. The Service Endpoint Interface Class

wscompile will generate the service endpoint interface class `MathUtil` instead of the default `AddNumbersImpl` in this example:

    <!-- wsdl:portType customization -->
    <bindings node="wsdl:definitions/wsdl:portType[@name='AddNumbersImpl']">
        <!-- change the generated SEI class -->
        <class name="MathUtil">
            <javadoc>Perform mathematical computations</javadoc>
        </class>
    </bindings>

##### 9.2.6.2. The Exception Class

wsimport will generate the `MathUtilException` class instead of the default `AddNumbersExeption` in this example:

    <!-- change the generated exception class name -->
    <bindings
            node="wsdl:definitions/wsdl:portType[@name='AddNumbersImpl']/wsdl:operation[@name='addNumbers']/wsdl:fault[@name='AddNumbersException']">
        <class name="MathUtilException">
            <javadoc>Exception generated during computation</javadoc>
        </class>
    </bindings>

##### 9.2.6.3. The Service Class

wsimport will generate `MathUtilService` instead of the default `AddNumbersService` in this example:

    <!-- wsdl:service customization -->
    <bindings node="wsdl:definitions/wsdl:service[@name='AddNumbersService']">
        <!-- change the generated service class -->
        <class name="MathUtilService">
            <javadoc>Service to perform mathematical computations</javadoc>
        </class>
    </bindings>

#### 9.2.7. Java Method Customization

The `jaxws:method` binding declaration is used to customize the generated Java method name of a service endpoint interface and to customize the port accessor method in the generated `Service` class. Refer to the external binding declaration file `custom-client.xml` in the `external-customize` sample.

##### 9.2.7.1. Service Endpoint Interface Methods

wsimport will generate a method named `add` instead of the default `addNumbers` in this example:

    <!-- wsdl:portType operation customization -->
    <bindings
            node="wsdl:definitions/wsdl:portType[@name='AddNumbersImpl']/wsdl:operation[@name='addNumbers']">
        <!-- change java method name from addNumbers() to add() -->
        <method name="add">
            <javadoc>Adds the numbers</javadoc>
        </method>
    </bindings>

##### 9.2.7.2. Port Accessor Methods in the Service Class

wsimport will generate the `getMathUtil` port accessor method in the generated `Service` class instead of the default `getAddNumbersImplPort` method in this example:

    <!-- change the port accessor method -->
    <bindings
            node="wsdl:definitions/wsdl:service[@name='AddNumbersService']/wsdl:port[@name='AddNumbersImplPort']">
        <method name="getMathUtil">
            <javadoc>Returns MathUtil port</javadoc>
        </method>
    </bindings>

#### 9.2.8. Java Parameter Customization

The `jaxws:parameter` binding declaration is used to change the parameter name of generated Java methods. It can be used to change the method parameter of a `wsdl:operation` in a `wsdl:portType.` Refer to the external binding declaration file `custom-client.xml` of the `external-customize` sample.

    <bindings
            node="wsdl:definitions/wsdl:portType[@name='AddNumbersImpl']/wsdl:operation[@name='addNumbers']">
        <!-- rename method parameters-->
        <parameter
                part="definitions/message[@name='addNumbers']/part[@name='parameters']"
                element="tns:number1" name="num1"/>

        ...

    </bindings>

The above sample renames the default parameter name of the Java method `addNumbers` from `number1` to `num1`.

#### 9.2.9. Javadoc customization

`jaxws:javadoc` customization can be used to specify javadoc text for java package, class(SEI, Service or Exception class) and on the methods in SEI and service class. Inorder to do it,it should appear on the corresponding wsdl nodes.

For package level javadoc:

    <jaxws:package name="xs:string">
        <jaxws:javadoc>xs:string</jaxws:javadoc>
    </jaxws:package>

For class level javadoc:

    <jaxws:class name="xs:string">
        <jaxws:javadoc>xs:string</jaxws:javadoc>
    </jaxws:class>

For method level javadoc:

    <jaxws:method name="xs:string">
        <jaxws:javadoc>xs:string</jaxws:javadoc>
    </jaxws:method>

For specific samples on javadoc customization for class, refer The Service Endpoint Interface Class, The Exception Class and The Service Class customization. For javadoc customization on method refer Service Endpoint Interface Methods and Port Accessor Methods in the Service Class customization and for package level customization refer Package Customization.

#### 9.2.10. XML Schema Customization

An XML schema inlined inside a compiled WSDL file can be customized by using standard JAXB bindings. These JAXB bindings can live inside the schema or as the child of a `jaxws:bindings` element in an external binding declaration file:

    <jaxws:bindings
            node="wsdl:definitions/wsdl:types/xsd:schema[@targetNamespace='http://duke.example.org']">
        <jaxb:schemaBindings>
            <jaxb:package name="fromwsdl.server"/>
        </jaxb:schemaBindings>
    </jaxws:bindings>

External XML schema files imported by the WSDL file can be customized using a JAXB external binding declaration file:

    <jxb:bindings xmlns:xsd="http://www.w3.org/2001/XMLSchema"
            xmlns:jxb="http://java.sun.com/xml/ns/jaxb" version="1.0">
        <jxb:bindings
                schemaLocation="http://localhost:8080/jaxws-external-customize/schema1.xsd"
                node="/xsd:schema">
            <jxb:schemaBindings>
                <jxb:package name="fromjava.client"/>
            </jxb:schemaBindings>
        </jxb:bindings>

        ...

    </jxb:bindings>

The external JAXB binding declaration file can be passed to wsimport using the `-b` switch. See the JAX-WS wsimport documentation for details.

#### 9.2.11. Handler Chain Customization

`jaxws:bindings` customization can be used to customize or add handlers. All that is needed is to inline a handler chain configuration conforming to JSR 181 Handler Chain configuration schema inside `jaxws:bindings` element.

Below is a sample JAX-WS binding declaration file with JSR 181 handler chain configuration:

    <jaxws:bindings xmlns:xsd="http://www.w3.org/2001/XMLSchema"
            xmlns:jaxb="http://java.sun.com/xml/ns/jaxb"
            xmlns:wsdl="http://schemas.xmlsoap.org/wsdl/"
            wsdlLocation="http://localhost:8080/jaxws-fromwsdlhandler/addnumbers?WSDL"
            xmlns:jaxws="http://java.sun.com/xml/ns/jaxws"
            xmlns:javaee="http://java.sun.com/xml/ns/javaee">
        <jaxws:bindings node="wsdl:definitions">
            <javaee:handler-chain>
                <javaee:handler-chain-name>LoggingHandlers
                </javaee:handler-chain-name>

                <javaee:handler>
                    <javaee:handler-name>Logger</javaee:handler-name>
                    <javaee:handler-class>fromwsdlhandler.common.LoggingHandler
                    </javaee:handler-class>
                </javaee:handler>
            </javaee:handler-chain>
        </jaxws:bindings>
    </jaxws:bindings>

When this customization file is passed on to wsimport tool using -b switch together with the WSDL, wsimport generates all the artifacts togather with a handler configuration file which has everything inside `jaxws:bindings` element enclosing the `jws:handler-chain` element. It also add `@javax.jws.HandlerChain` annotation in the generated SEI class. JAXWS runtime uses the `@HandlerChain` annotation from the SEI to find the handlers that has to be added into the handle chain.

## 10. Annotations

### 10.1. Overview

Annotations play a critical role in JAX-WS 2.2. First, annotations are used in mapping Java to WSDL and schema. Second, annotations are used a runtime to control how the JAX-WS runtime processes and responds to web service invocations. Currently the annotations utilized by JAXR-WS 2.0 are defined in separate JSRs:

- JSR 181: Web Services Metadata for the Java TM Platform

- JSR 222: Java TM Architecture for XML Binding (JAXB) 2.1

- JSR 224: Java TM API for XML Web Services (JAX-WS) 2.0 and 2.1

- JSR 250: Common Annotations for the Java TM Platform.

### 10.2. JSR 181 (Web Services Metadata) Annotations

Because JSR 181 has been written to work with JAX-RPC 1.1, we have made slight changes in the use and interpretation of these annotations to work better with JAX-WS 2.0. We are working with the JSR 181 expert group to align the next release with JAX-WS 2.0 and we hope that all of the changes we have made will be folded in.

#### 10.2.1. `@javax.jws.WebService`

The purpose of this annotation is to mark an endpoint implementation as implementing a web service or to mark that a service endpoint interface as defining a web service interface. All endpoint implementation classes MUST have a `WebService` annotation and must meet the requirements of section 3.3 of the JAX-WS 2.0 specification.

Table 3. `@javax.jws.WebService` - Description of Properties

Property | Description | Default
--- | --- | ---
`name` | The name of the `wsdl:portType` | The unqualified name of the Java class or interface
`targetNamespace` | The XML namespace of the the WSDL and some of the XML elements generated from this web service. Most of the XML elements will be in the namespace according to the JAXB mapping rules. | The namespace mapped from the package name containing the web service according to section 3.2 of the JAX-WS 2.0 specification.
`serviceName` | The Service name of the web service: `wsdl:service` | The unqualified name of the Java class or interface + "Service"
`endpointInterface` | The qualified name of the service endpoint interface. If the implementation bean references a service endpoint interface, that service endpoint interface is used to determine the abstract WSDL contract (portType and bindings). In this case, the service implementation bean MUST NOT include any JSR 181 annotations other than `@WebService` and `@HandlerChain` In addition, the `@WebService` annotation MUST NOT include the name annotation element. The endpoint implementation class is not required to implement the endpointInterface. | None – If not specified, the endpoint implementation class is used to generate the web service contract. In this case, a service endpoint interface is not required.
`portName` | The `wsdl:portName` | The `WebService.name` + "Port"
`wsdlLocation` | Not currently used by JAX-WS RI 2.2.6 |

##### 10.2.1.1. Annotation Type Definition

    @Retention(value = RetentionPolicy.RUNTIME)
    @Target({ElementType.TYPE})
    public @interface WebService {
        String name() default "";

        String targetNamespace() default "";

        String serviceName() default "";

        String wsdlLocation() default "";

        String endpointInterface() default "";

        String portName() default "";
    }

##### 10.2.1.2. Examples

Example 3. `@javax.jws.WebService` - Example 1

    @WebService(name = "AddNumbers",
            targetNamespace = "http://duke.example.org")
    public class AddNumbersImpl {
        /**
         * @param number1
         * @param number2
         * @return The sum
         * @throws AddNumbersException if any of the numbers to be added is
         *                             negative.
         */
        public int addNumbers(int number1, int number2) throws
                AddNumbersException {
            if (number1 < 0 || number2 < 0) {
                throw new AddNumbersException("Negative number cant be added " +
                        "!", "Numbers: " + number1 + ", " + number2);
            }
            return number1 + number2;
        }
    }

If you are familiar with JAX-RPC 1.1, you will notice that the `AddNumbersImpl` implementation class does not implement a service endpoint interface. In JAX-WS 2.2 a service endpoint interface is no longer required. If a service endpoint interfaces is desired, then the `@WebService` annotation on the endpoint implementation is modified to specify the endpoint interface and the actual service endpoint interface must also have a `@WebService` annotation. The following is the above `AddNumbersImpl` modified to use a service endpoint interface.

Example 4. `@javax.jws.WebService` - Example 2 - Implementation class using Service Endpoint Interface

    @WebService(endpointInterface = "annotations.server.AddNumbersIF")
    public class AddNumbersImpl {
        /**
         * @param number1
         * @param number2
         * @return The sum
         * @throws AddNumbersException if any of the numbers to be added is
         * negative.
         */
        public int addNumbers(int number1, int number2) throws
                AddNumbersException {
            if (number1 < 0 || number2 < 0) {
                throw new AddNumbersException("Negative number cant be " +
                        "added!", "Numbers: " + number1 + ", " + number2);
            } return number1 + number2;
        }
    }

    @WebService(targetNamespace = "http://duke.example.org",
            name = "AddNumbers")
    public interface AddNumbersIF extends Remote {

        public int addNumbers(int number1, int number2) throws
                RemoteException, AddNumbersException;

    }

#### 10.2.2. `@javax.jws.WebMethod`

The purpose of this annotation is to expose a method as a web service operation. The method must meet all the requirements of section 3.4 of the JAX-WS 2.0 specification.

Table 4. `@javax.jws.WebMethod` - Description of Properties

Property | Description | Default
--- | --- | ---
`operationName` | The name of the `wsdl:operation` matching this method. For operations using the mode defined by `SOAPBinding.Style.DOCUMENT`, `SOAPBinding.Use.LITERAL`, and `SOAPBinding.ParameterStyle.BARE`, this name is also used for the global XML element representing the operations body element. The namespace of this name is taken from the value `@WebService.targetNamespace` or its default value. | The name of the Java method
`action` | The XML namespace of the the WSDL and some of the XML elements generated from this web service. Most of the XML elements will be in the namespace according to the JAXB mapping rules. | ""
`exclude` | Used to exclude a method from the WebService. | false

##### 10.2.2.1. Annotation Type Definition

    @Retention(value = RetentionPolicy.RUNTIME)
    @Target({ElementType.METHOD})
    public @interface WebMethod {
        String operationName() default "";

        String action() default "";

        boolean exclude() default false;
    }

##### 10.2.2.2. Examples

Example 5. `@javax.jws.WebMethod` - Example

    @WebService(targetNamespace = "http://duke.example.org",
            name = "AddNumbers")
    public interface AddNumbersIF extends Remote {

        @WebMethod(operationName = "add", action = "urn:addNumbers")
        public int addNumbers(int number1, int number2) throws
                RemoteException, AddNumbersException;

    }

#### 10.2.3. `@javax.jws.OneWay`

The purpose of this annotation is to mark a method as a web service one-way operation. The method must meet all the requirements of section 3.4.1 of the JSR 224 spec.

There are no properties on the `OneWay` annotation.

##### 10.2.3.1. Annotation Type Definition

    @Retention(value = RetentionPolicy.RUNTIME)
    @Target({ElementType.METHOD})
    public @interface Oneway {
    }

##### 10.2.3.2. Examples

Example 6. `@javax.jws.OneWay` - Example

    @WebService(name = "CheckIn")
    public class CheckInIF {

        @WebMethod
        @OneWay
        public void checkIn(String name);

    }

#### 10.2.4. `@javax.jws.WebParam`

This annotation is used to customize the mapping of a single parameter to a message part or element.

Table 5. `@javax.jws.WebParam` - Description of Properties

Property | Description | Default
--- | --- | ---
`name` | Name of the parameter. If the operation is RPC style and `@WebParam.partName` has not been specified, this is name of the `wsdl:part` representing the parameter. `@WebMethod.operation` Name, if the operation is document style and the parameter style is `BARE`. Otherwise, the default is `argN` if the operation is document style or the parameter maps to a header, this is the local name of the XML element representing the parameter. A name MUST be specified if the operation is document style, the parameter style is `BARE`, and the mode is `OUT` or `INOUT`. | `@WebMethod.operation` Name, if the operation is document style and the parameter style is `BARE`. Otherwise, the default is `argN`, where `N` represents the index of the parameter in the method signature (starting at `arg0`).
`targetNamespace` | The XML namespace for the parameter. Only used if the operation is document style or the paramater maps to a header. If the target namespace is set to "", this represents the empty namespace. | The empty namespace, if the operation is document style, the parameter style is `WRAPPED`, and the parameter does not map to a header. Otherwise, the default is the `targetNamespace` for the Web Service.
`mode` | Represents the direction the parameter flows for this method. Possible values are `IN`, `INOUT` and `OUT`. `INOUT` and `OUT` modes can only be used with parameters that meet the requirements for a holder as classified by section 3.5 of the JAX-WS 2.0 specification. `OUT` and `INOUT` parameters can be used by all `RPC` and `DOCUMENT` bindings. | `IN` for non-holder parameters `INOUT` for holder parameters.
`header` | Specifies whether the parameter should be carried in a header. | `FALSE`
`partName` | Used to specify the `partName` for the parameter with `RPC` or `DOCUMENT`/`BARE` operations. | `@WebParam.name`

##### 10.2.4.1. Annotation Type Definition

    @Retention(value = RetentionPolicy.RUNTIME)
    @Target({ElementType.PARAMETER})
    public @interface WebParam {

        public enum Mode {
            IN,
            OUT,
            INOUT
        }

        String name() default "";

        String targetNamespace() default "";

        Mode mode() default Mode.IN;

        boolean header() default false;

        String partName() default "";
    }

##### 10.2.4.2. Examples

Example 7. `@javax.jws.WebParam` - Example 1

    @WebService(targetNamespace = "http://duke.example.org",
            name = "AddNumbers")
    public interface AddNumbersIF extends Remote {

        @WebMethod(operationName = "add", action = "urn:addNumbers")
        @WebResult(name = "return")
        public int addNumbers(@WebParam(name = "num1") int number1,
                              @WebParam(name = "num2") int number2) throws
                RemoteException, AddNumbersException;

    }

Example 8. `@javax.jws.WebParam` - Example 2

    @WebService(targetNamespace = "http://duke.example.org",
            name = "AddNumbers")
    public interface AddNumbersIF extends Remote {

        @WebMethod(operationName = "add", action = "urn:addNumbers")
        @WebResult(name = "return")
        public void addNumbers(@WebParam(name = "num1") int number1,
                               @WebParam(name = "num2") int number2,
                               @WebParam(name = "result",
                mode = WebParam.Mode.OUT) Holder<Integer> result) throws RemoteException, AddNumbersException;

    }

#### 10.2.5. `@javax.jws.WebResult`

This annotation is used to customize the mapping of the method return value to a WSDL part or XML element.

Table 6. `@javax.jws.WebResult` - Description of Properties

Property | Description | Default
--- | --- | ---
`name` | The name of the return value in the WSDL and on the wire. For `RPC` bindings this is the part name of the return value in the response message. For `DOCUMENT` bindings this is the local name of the XML element representing the return value. | "return" for `RPC` and `DOCUMENT`/`WRAPPED` bindings. Method name + "Response" for `DOCUMENT`/`BARE` bindings.
`targetNamespace` | The XML namespace for the return value. Only used if the operation is document style or the return value maps to a header. If the target namespace is set to "", this represents the empty namespace. | The empty namespace, if the operation is document style, the parameter style is `WRAPPED`, and the return value does not map to a header, Otherwise, the default is the `targetNamespace` for the Web Service.
`header` | Specifies whether the result should be carried in a header. | `FALSE`
`partName` | Used to specify the `partName` for the result with `RPC` or `DOCUMENT`/`BARE` operations. | `@WebResult.name`

##### 10.2.5.1. Annotation Type Definition

    @Retention(value = RetentionPolicy.RUNTIME)
    @Target({ElementType.METHOD})
    public @interface WebResult {

        String name() default "return";

        String targetNamespace() default "";

        boolean header() default false;

        String partName() default "";
    }

##### 10.2.5.2. Examples

Example 9. `@javax.jws.WebResult` - Example

    @WebService(targetNamespace = "http://duke.example.org",
            name = "AddNumbers")
    public interface AddNumbersIF extends Remote {

        @WebMethod(operationName = "add", action = "urn:addNumbers")
        @WebResult(name = "return")
        public int addNumbers(@WebParam(name = "num1") int number1,
                              @WebParam(name = "num2") int number2) throws
                RemoteException, AddNumbersException;

    }

#### 10.2.6. `@javax.jws.HandlerChain`

This annotation is used to specified an externally defined handler chain.

Table 7. `@javax.jws.HandlerChain` - Description of Properties

Property | Description | Default
--- | --- | ---
`file` | Location of the file containing the handler chain definition. The location can be relative or absolute with in a classpath system. If the location is relative, it is relative to the package of the web service. If it is absolute, it is absolute from some path on the classpath. | None
`name` | DEPRECATED The handler chain name from within the handler chain file. | ""

##### 10.2.6.1. Annotation Type Definition

    @Retention(value = RetentionPolicy.RUNTIME)
    @Target({ElementType.TYPE})
    public @interface HandlerChain {

        String file();

        @Deprecated String name() default "";

    }

##### 10.2.6.2. Examples

Example 10. `@javax.jws.HandlerChain` - Example

    @WebService
    @HandlerChain(file = "handlers.xml")
    public class AddNumbersImpl {
        /**
         * @param number1
         * @param number2
         * @return The sum
         * @throws AddNumbersException if any of the numbers to be added is
         *                             negative.
         */
        public int addNumbers(int number1, int number2) throws
                AddNumbersException {
            if (number1 < 0 || number2 < 0) {
                throw new AddNumbersException("Negative number cant be added " +
                        "!", "Numbers: " + number1 + ", " + number2);
            }
            return number1 + number2;
        }

    }

Example 11. `@javax.jws.HandlerChain` - Example - handlers.xml

    <jws:handler-config xmlns:jws="http://java.sun.com/xml/ns/javaee">
        <jws:handler-chains>
            <jws:handler-chain>
                <jws:handler>
                    <jws:handler-class>fromjavahandler.common.LoggingHandler
                    </jws:handler-class>
                </jws:handler>
            </jws:handler-chain>
        </jws:handler-chains>
    </jws:handler-config>

### Important

When using a handler chain file, it is important that the file is store in the appropriate place in the classpath so that the file can be found. This means that when a raw WAR file is created that the file must be place in the proper directory. Please refer to the fromjavahandlers sample application and the Handler for more information.

#### 10.2.7. `@javax.jws.soap.SOAPBinding`

JSR 181 also allows you to specify a `SOAPBinding` annotation on an endpoint implementation or service endpoint interface. This annotation lets the developer choose between `DOCUMENT\LITERAL WRAPPED`, `DOCUMENT\LITERAL BARE`, `RPC\LITERAL` and `RPC\ENCODED` endpoints with the default being `DOCUMENT\LITERAL WRAPPED`. JAX-WS 2.2 does not support `RPC\ENCODED`. The main difference between `DOCUMENT\LITERAL BARE` and `DOCUMENT\LITERAL WRAPPED` is that methods on a `DOCUMENT\LITERAL WRAPPED` endpoint can have multiple parameters bound to the body of a SOAP message, while a `DOCUMENT\LITERAL BARE` can only have one such parameter. The main difference between `DOCUMENT\LITERAL WRAPPED` and `RPC\LITERAL` is that a `DOCUMENT\LITERAL` invocation can be fully validated by a standard validating XML parser, while an `RPC\LITERAL` invocation cannot because of the implied wrapper element around the invocation body.

Table 8. `@javax.jws.soap.SOAPBinding` - Description of Properties

Property | Description | Default
--- | --- | ---
`style` | Defines the style for messages used in a web service. The value can be either `DOCUMENT` or `RPC`. | `DOCUMENT`
`use` | Defines the encoding used for messages used in web service. Can only be `LITERAL` for JAX-WS 2.2. | `LITERAL`
`parameterStyle` | Determines if the method's parameters represent the entire message body or whether the parameters are wrapped in a body element named after the operation. Choice of `WRAPPED` or `BARE`. `BARE` can only be used with `DOCUMENT` style bindings. | `WRAPPED`

##### 10.2.7.1. Annotation Type Definition

    @Retention(value = RetentionPolicy.RUNTIME)
    @Target({ElementType.TYPE, ElementType.METHOD})
    public @interface SOAPBinding {

        public enum Style {
            DOCUMENT,
            RPC,
        }

        public enum Use {
            LITERAL,
            ENCODED,
        }

        public enum ParameterStyle {
            BARE,
            WRAPPED,
        }

        Style style() default Style.DOCUMENT;

        Use use() default Use.LITERAL;

        ParameterStyle parameterStyle() default ParameterStyle.WRAPPED;

    }

##### 10.2.7.2. Examples

Example 12. `@javax.jws.soap.SOAPBinding` - Example

    @WebService(targetNamespace = "http://duke.example.org",
            name = "AddNumbers")
    @SOAPBinding(style = SOAPBinding.Style.RPC,
            use = SOAPBinding.Use.LITERAL)
    public interface AddNumbersIF extends Remote {

        @WebMethod(operationName = "add", action = "urn:addNumbers")
        @WebResult(name = "return")
        public int addNumbers(@WebParam(name = "num1") int number1,
                              @WebParam(name = "num2") int number2) throws
                RemoteException, AddNumbersException;

    }

### 10.3. JSR 224 (JAX-WS) Annotations

The following are standard annotations needed by JAX-WS that are not defined in JSR 181. The developer may not ever use these annotations directly as some of them are generated by JAX-WS tools but they will be presented here to avoid confusion.

#### 10.3.1. `@javax.xml.ws.BindingType`

The `BindingType` annotation is used to specify the binding to use for a web service endpoint implementation class. As well as specify additional features that may be enabled.

This annotation may be overriden programmatically or via deployment descriptors, depending on the platform in use.

Table 9. `@javax.xml.ws.BindingType` - Description of Properties

Property | Description | Default
--- | --- | ---
`value` | A binding identifier (a URI). See the `SOAPBinding` and `HTTPBinding` for the definition of the standard binding identifiers. `@see javax.xml.ws.Binding` `@see javax.xml.ws.soap.SOAPBinding#SOAP11HTTP_BINDING` `@see javax.xml.ws.soap.SOAPBinding#SOAP12HTTP_BINDING` `@see javax.xml.ws.http.HTTPBinding#HTTP_BINDING` | "`SOAP 1.1 Protocol`"/`HTTP`

##### 10.3.1.1. Annotation Type Definition

    @Target(ElementType.TYPE)
    @Retention(RetentionPolicy.RUNTIME)
    @Documented
    public @interface BindingType {
        /**
         * A binding identifier (a URI).
         * If not specified, the default is the SOAP 1.1 / HTTP
         * binding.
         * <p/>
         * See the
         * SOAPBinding and
         * HTTPBinding
         * for the definition of the standard binding identifiers.
         *
         * @see javax.xml.ws.Binding
         * @see javax.xml.ws.soap.SOAPBinding#SOAP11HTTP_BINDING
         * @see javax.xml.ws.soap.SOAPBinding#SOAP12HTTP_BINDING
         * @see javax.xml.ws.http.HTTPBinding#HTTP_BINDING
         */
        String value() default "";

        /**
         * An array of Features to enable/disable on the specified
         * binding.
         * If not specified, features will be enabled/disabled based
         * on their own rules. Refer to the documentation of the
         * feature
         * to determine when it will be automatically enabled.
         * <p/>
         * See the
         * SOAPBinding
         * for the definition of the standard feature identifiers.
         *
         * @see javax.xml.ws.RespectBindingFeature
         * @see javax.xml.ws.soap.AddressingFeature
         * @see javax.xml.ws.soap.MTOMFeature
         * @since JAX-WS 2.1
         */
        Feature[] features() default {};
    }

##### 10.3.1.2. Examples

Example 13. `@javax.xml.ws.BindingType` - Example

Given the web service defined by

    @WebService
    @BindingType(value = "http://www.w3.org/2003/05/soap/bindings/HTTP/")
    public class AddNumbersImpl {
        /**
         * @param number1
         * @param number2
         * @return The sum
         * @throws AddNumbersException if any of the numbers to be added is
         *                             negative.
         */
        public int addNumbers(int number1, int number2) throws
                AddNumbersException {
            if (number1 < 0 || number2 < 0) {
                throw new AddNumbersException("Negative number cant be " +
                        "added!", "Numbers: " + number1 +
                        ", " + number2);
            }
            return number1 + number2;
        }
    }

The deployed endpoint would use the SOAP 1.2 over HTTP binding.

#### 10.3.2. `@javax.xml.ws.RequestWrapper`

This annotation annotates methods in the Service Endpoint Interface with the request wrapper bean to be used at runtime.

When starting from Java this annotation is used to resolve overloading conflicts in `DOCUMENT\LITERAL` mode. Only the `className` is required in this case.

Table 10. `@javax.xml.ws.RequestWrapper` - Description of Properties

Property | Description | Default
--- | --- | ---
`localName` | Specifies the `localName` of the XML Schema element representing this request wrapper. | `operationName` as defined by `@javax.jws.WebMethod`
`targetNamespace` | namespace of the request wrapper element. | the `targetNamespace` of the SEI
`className` | The name of the Class representing the request wrapper. |

##### 10.3.2.1. Annotation Type Definition

    @Target({ElementType.TYPE, ElementType.METHOD})
    @Retention(RetentionPolicy.RUNTIME)
    public @interface RequestWrapper {
        /**
         * Elements local name.
         */
        public String localName() default "";

        /**
         * Elements namespace name.
         */
        public String targetNamespace() default "";

        /**
         * Request wrapper bean name.
         */
        public String className() default "";
    }

##### 10.3.2.2. Examples

Example 14. `@javax.xml.ws.RequestWrapper` - Example

    public interface AddNumbersImpl {
        /**
         * @param arg1
         * @param arg0
         * @return returns int
         * @throws AddNumbersException_Exception
         */
        @WebMethod
        @WebResult(targetNamespace = "")
        @RequestWrapper(localName = "addNumbers",
                targetNamespace = "http://server.fromjava/",
                className = "fromjava.client.AddNumbers")
        @ResponseWrapper(localName = "addNumbersResponse",
                targetNamespace = "http://server.fromjava/",
                className = "fromjava.client.AddNumbersResponse")
        public int addNumbers(@WebParam(name = "arg0", targetNamespace = "")
                                  int arg0, @WebParam(name = "arg1", targetNamespace = "") int arg1) throws AddNumbersException_Exception;
    }

#### 10.3.3. `@javax.xml.ws.ResponseWrapper`

This annotation annotates methods in the Service Endpoint Interface with the response wrapper bean to be used at runtime.

When starting from Java this annotation is used to resolve overloading conflicts in `DOCUMENT\LITERAL` mode. Only the `className` is required in this case.

Table 11. `@javax.xml.ws.ResponseWrapper` - Description of Properties

Property | Description | Default
--- | --- | ---
`localName` | Specifies the `localName` of the XML Schema element representing this request wrapper. | `operationName` as defined by `@javax.jws.WebMethod`
`targetNamespace` | namespace of the request wrapper element. | the `targetNamespace` of the SEI
`className` | The name of the Class representing the request wrapper. |

##### 10.3.3.1. Annotation Type Definition

    @Target(ElementType.METHOD)
    @Retention(RetentionPolicy.RUNTIME)
    public @interface ResponseWrapper {
        /**
         * Elements local name.
         */
        public String localName() default "";

        /**
         * Elements namespace name.
         */
        public String targetNamespace() default "";

        /**
         * Request wrapper bean name.
         */
        public String className() default "";
    }

##### 10.3.3.2. Examples

Example 15. `@javax.xml.ws.ResponseWrapper` - Example

    public interface AddNumbersImpl {
        /**
         * @param arg1
         * @param arg0
         * @return returns int
         * @throws AddNumbersException_Exception
         */
        @WebMethod
        @WebResult(targetNamespace = "")
        @RequestWrapper(localName = "addNumbers",
                targetNamespace = "http://server.fromjava/",
                className = "fromjava.client.AddNumbers")
        @ResponseWrapper(localName = "addNumbersResponse",
                targetNamespace = "http://server.fromjava/",
                className = "fromjava.client.AddNumbersResponse")
        public int addNumbers(@WebParam(name = "arg0", targetNamespace = "")
                                  int arg0, @WebParam(name = "arg1", targetNamespace = "") int arg1) throws AddNumbersException_Exception;
    }

#### 10.3.4. `@javax.xml.ws.ServiceMode`

This annotation allows the Provider developer to indicate whether a `Provider` implementation wishes to work with entire protocol messages or just with protocol message payloads.

Table 12. `@javax.xml.ws.ServiceMode` - Description of Properties

Property | Description | Default
--- | --- | ---
`value` | Convey whether the `Provider` endpoint wants to access then entire message (`MESSAGE`) or just the payload (`PAYLOAD`). | `PAYLOAD`

##### 10.3.4.1. Annotation Type Definition

    @Target({ElementType.TYPE})
    @Retention(RetentionPolicy.RUNTIME)
    @Inherited
    @Documented
    public @interface ServiceMode {
        /**
         * Service mode. <code>PAYLOAD</code> indicates that the
         * <code>Provider</code> implementation
         * wishes to work with protocol message payloads only.
         * <code>MESSAGE</code> indicates
         * that the <code>Provider</code> implementation wishes to work with
         * entire protocol
         * messages.
         */
        public Service.Mode value() default Service.Mode.PAYLOAD;
    }

##### 10.3.4.2. Examples

Example 16. `@javax.xml.ws.ServiceMode` - Example

    @ServiceMode(value = Service.Mode.PAYLOAD)
    public class AddNumbersImpl implements Provider<Source> {
        public Source invoke(Source source) throws RemoteException {
            try {
                DOMResult dom = new DOMResult();
                Transformer trans = TransformerFactory.newInstance()
                        .newTransformer();
                trans.transform(source, dom);
                Node node = dom.getNode();
                Node root = node.getFirstChild();
                Node first = root.getFirstChild();
                int number1 = Integer.decode(first.getFirstChild()
                        .getNodeValue());
                Node second = first.getNextSibling();
                int number2 = Integer.decode(second.getFirstChild()
                        .getNodeValue());
                return sendSource(number1, number2);
            } catch (Exception e) {
                e.printStackTrace();
                throw new RemoteException("Error in provider endpoint");
            }
        }

        private Source sendSource(int number1, int number2) {
            int sum = number1 + number2;
            String body = "<ns:addNumbersResponse xmlns:ns =\"http://duke" +
                    ".example.org\"><return>" + sum +
                    "</return></ns:addNumbersResponse>";
            Source source = new StreamSource(new ByteArrayInputStream(body.getBytes()));
            return source;
        }
    }

#### 10.3.5. `@javax.xml.ws.WebEndpoint`

Used to annotate the `getPortName()` methods of a generated service interface.

The information specified in this annotation is sufficient to uniquely identify a `wsdl:port` element inside a `wsdl:service`. The latter is determined based on the value of the `WebServiceClient` annotation on the generated service interface itself.

Table 13. `@javax.xml.ws.WebEndpoint` - Description of Properties

Property | Description | Default
--- | --- | ---
`name` | Defines the local name of the XML element representing the corresponding port in the WSDL. | ""

##### 10.3.5.1. Annotation Type Definition

    /**
     * Used to annotate the <code>get<em>PortName</em>()</code>
     * methods of a generated service interface.
     * <p/>
     * <p>The information specified in this annotation is sufficient
     * to uniquely identify a <code>wsdl:port</code> element
     * inside a <code>wsdl:service</code>. The latter is
     * determined based on the value of the <code>WebServiceClient</code>
     * annotation on the generated service interface itself.
     *
     * @see javax.xml.ws.WebServiceClient
     * @since JAX-WS 2.0
     */
    @Target({ElementType.METHOD})
    @Retention(RetentionPolicy.RUNTIME)
    @Documented
    public @interface WebEndpoint {
        /**
         * The local name of the endpoint.
         */
        String name() default "";
    }

##### 10.3.5.2. Examples

Example 17. `@javax.xml.ws.WebEndpoint` - Example

    @WebServiceClient(name = "AddNumbersImplService",
            targetNamespace = "http://server.fromjava/",
            wsdlLocation = "http://localhost:8080/jaxws-fromjava/addnumbers" +
                    "?wsdl")
    public class AddNumbersImplService extends Service {
        private final static URL WSDL_LOCATION;
        private final static QName ADDNUMBERSIMPLSERVICE = new QName
                ("http://server.fromjava/", "AddNumbersImplService");
        private final static QName ADDNUMBERSIMPLPORT = new QName
                ("http://server.fromjava/", "AddNumbersImplPort");

        static {
            URL url = null;
            try {
                url = new URL("http://localhost:8080/jaxws-fromjava" +
                        "/addnumbers?wsdl");
            } catch (MalformedURLException e) {
                e.printStackTrace();
            }
            WSDL_LOCATION = url;
        }

        public AddNumbersImplService(URL wsdlLocation, QName serviceName) {
            super(wsdlLocation, serviceName);
        }

        public AddNumbersImplService() {
            super(WSDL_LOCATION, ADDNUMBERSIMPLSERVICE);
        }

        /**
         * @return returns AddNumbersImpl
         */
        @WebEndpoint(name = "AddNumbersImplPort")
        public AddNumbersImpl getAddNumbersImplPort() {
            return (AddNumbersImpl) super.getPort(ADDNUMBERSIMPLPORT, AddNumbersImpl.class);
        }
    }

#### 10.3.6. `@javax.xml.ws.WebFault`

This annotation is generated by the JAX-WS tools into service specific exception classes generated from a WSDL to customize the local and namespace name of the fault element and the name of the fault bean and to mark the service specific exception as one generated from WSDL. The reason that the JAX-WS needs to know if a service specific exception is generated from a WSDL or not is because these exceptions will already have a fault bean generated for them. The name of this fault bean is not the same name as the one generated from a Java service specific exception class. For more information on this topic, please refer to section 3.6 of the JAX-WS 2.0 specification.

Table 14. `@javax.xml.ws.WebFault` - Description of Properties

Property | Description | Default
--- | --- | ---
`name` | Defines the local name of the XML element representing the corresponding fault in the WSDL. | ""
`targetNamespace` | Defines the namespace of the XML element representing the corresponding fault in the WSDL. | ""
`faultBean` | The qualified name of the Java class that represents the detail of the fault message. | ""

##### 10.3.6.1. Annotation Type Definition

    /**
     * Used to annotate service specific exception classes to customize
     * to the local and namespace name of the fault element and the name
     * of the fault bean.
     *
     * @since JAX-WS 2.0
     */
    @Target({ElementType.TYPE})
    @Retention(RetentionPolicy.RUNTIME)
    @Documented
    public @interface WebFault {
        /**
         * Element's local name.
         */
        public String name() default "";

        /**
         * Element's namespace name.
         */
        public String targetNamespace() default "";

        /**
         * Fault bean name.
         */
        public String faultBean() default "";

        /**
         * wsdl:Message's name. Default name is the exception's class name.
         *
         * @since JAX-WS 2.2
         */
        public String messageName() default "";
    }

##### 10.3.6.2. Examples

Example 18. `@javax.xml.ws.WebFault` - Example

    @javax.xml.ws.WebFault(name = "AddNumbersException",
            targetNamespace = "http://server.fromjava/jaxws")
    public class AddNumbersException_Exception extends Exception {
        private fromjava.client.AddNumbersException faultInfo;

        public AddNumbersException_Exception(String message,
                                             fromjava.client.AddNumbersException faultInfo) {
            super(message);
            this.faultInfo = faultInfo;
        }

        public AddNumbersException_Exception(String message,
                                             fromjava.client
                                                     .AddNumbersException faultInfo, Throwable cause) {
            super(message, cause);
            this.faultInfo = faultInfo;
        }

        public fromjava.client.AddNumbersException getFaultInfo() {
            return faultInfo;
        }

    }

#### 10.3.7. `@javax.xml.ws.WebServiceClient`

The information specified in this annotation is sufficient to uniquely identify a `wsdl:service` element inside a WSDL document. This `wsdl:service` element represents the Web service for which the generated service interface provides a client view.

Table 15. `@javax.xml.ws.WebServiceClient` - Description of Properties

Property | Description | Default
--- | --- | ---
`name` | Defines the local name of the `wsdl:serviceName` in the WSDL. | ""
`targetNamespace` | Defines the namespace for the `wsdl:serviceName` in the WSDL. | ""
`wsdlLocation` | Specifies the location of the WSDL that defines this service. | ""

##### 10.3.7.1. Annotation Type Definition

    /**
     * Used to annotate a generated service interface.
     * <p/>
     * <p>The information specified in this annotation is sufficient
     * to uniquely identify a <code>wsdl:service</code>
     * element inside a WSDL document. This <code>wsdl:service</code>
     * element represents the Web service for which the generated
     * service interface provides a client view.
     *
     * @since JAX-WS 2.0
     */
    @Target({ElementType.TYPE})
    @Retention(RetentionPolicy.RUNTIME)
    @Documented
    public @interface WebServiceClient {
        /**
         * The local name of the Web service.
         */
        String name() default "";

        /**
         * The namespace for the Web service.
         */
        String targetNamespace() default "";

        /**
         * The location of the WSDL document for the service (a URL).
         */
        String wsdlLocation() default "";
    }

##### 10.3.7.2. Examples

Example 19. `@javax.xml.ws.WebServiceClient` - Example

    @WebServiceClient(name = "AddNumbersImplService",
            targetNamespace = "http://server.fromjava/",
            wsdlLocation = "http://localhost:8080/jaxws-fromjava/addnumbers" +
                    "?wsdl")
    public class AddNumbersImplService extends Service {
        private final static URL WSDL_LOCATION;
        private final static QName ADDNUMBERSIMPLSERVICE = new QName
                ("http://server.fromjava/", "AddNumbersImplService");
        private final static QName ADDNUMBERSIMPLPORT = new QName
                ("http://server.fromjava/", "AddNumbersImplPort");

        static {
            URL url = null;
            try {
                url = new URL("http://localhost:8080/jaxws-fromjava" +
                        "/addnumbers?wsdl");
            } catch (MalformedURLException e) {
                e.printStackTrace();
            }
            WSDL_LOCATION = url;
        }

        public AddNumbersImplService(URL wsdlLocation, QName serviceName) {
            super(wsdlLocation, serviceName);
        }

        public AddNumbersImplService() {
            super(WSDL_LOCATION, ADDNUMBERSIMPLSERVICE);
        }

        /**
         * @return returns AddNumbersImpl
         */
        @WebEndpoint(name = "AddNumbersImplPort")
        public AddNumbersImpl getAddNumbersImplPort() {
            return (AddNumbersImpl) super.getPort(ADDNUMBERSIMPLPORT, AddNumbersImpl.class);
        }
    }

#### 10.3.8. `@javax.xml.ws.WebServiceProvider`

Annotation used to annotate a `Provider` implementation class.

Table 16. `@javax.xml.ws.WebServiceProvider` - Description of Properties

Property | Description | Default
--- | --- | ---
`targetNamespace` | The XML namespace of the the WSDL and some of the XML elements generated from this web service. Most of the XML elements will be in the namespace according to the JAXB mapping rules. | The namespace mapped from the package name containing the web service according to section 3.2 of the JAX-WS 2.0 specification.
`serviceName` | The Service name of the web service: `wsdl:service` | The unqualified name of the Java class or interface + "Service"
`portName` | The `wsdl:portName` |
`wsdlLocation` | Location of the WSDL description for the service |

##### 10.3.8.1. Annotation Type Definition

    /**
     * Used to annotate a Provider implementation class.
     *
     * @since JAX-WS 2.0
     * @see javax.xml.ws.Provider
     */
    @Target(ElementType.TYPE)
    @Retention(RetentionPolicy.RUNTIME)
    @Documented
    public @interface WebServiceProvider {
        /**
         * Location of the WSDL description for the service.
         */
        String wsdlLocation() default "";

        /**
         * Service name.
         */
        String serviceName() default "";

        /**
         * Target namespace for the service
         */
        String targetNamespace() default "";

        /**
         * Port name.
         */
        String portName() default "";
    }

##### 10.3.8.2. Examples

Example 20. `@javax.xml.ws.WebServiceProvider` - Example

    @ServiceMode(value = Service.Mode.PAYLOAD)
    @WebServiceProvider(wsdlLocation = "WEB-INF/wsdl/AddNumbers.wsdl")
    public class AddNumbersImpl implements Provider {
        public Source invoke(Source source) {
            try {
                DOMResult dom = new DOMResult();
                Transformer trans = TransformerFactory.newInstance()
                        .newTransformer();
                trans.transform(source, dom);
                Node node = dom.getNode();
                Node root = node.getFirstChild();
                Node first = root.getFirstChild();
                int number1 = Integer.decode(first.getFirstChild()
                        .getNodeValue());
                Node second = first.getNextSibling();
                int number2 = Integer.decode(second.getFirstChild()
                        .getNodeValue());
                return sendSource(number1, number2);
            } catch (Exception e) {
                e.printStackTrace();
                throw new RuntimeException("Error in provider endpoint", e);
            }
        }

        private Source sendSource(int number1, int number2) {
            int sum = number1 + number2;
            String body = "" + sum + "";
            Source source = new StreamSource(new ByteArrayInputStream(body.getBytes()));
            return source;
        }
    }

#### 10.3.9. `@javax.xml.ws.WebServiceRef`

The `WebServiceRef` annotation is used to define a reference to a web service and (optionally) an injection target for it. Web service references are resources in the Java EE 5 sense.

Table 17. `@javax.xml.ws.WebServiceRef` - Description of Properties

Property | Description | Default
--- | --- | ---
`name` | The JNDI name of the resource. For field annotations, the default is the field name. For method annotations, the default is the JavaBeans property name corresponding to the method. For class annotations, there is no default and this must be specified. |
`type` | The Java type of the resource. For field annotations, the default is the type of the field. For method annotations, the default is the type of the JavaBeans property. For class annotations, there is no default and this must be specified. |
`mappedName` | A product specific name that this resource should be mapped to. |
`value` | The service class, always a type extending `javax.xml.ws.Service`. This element must be specified whenever the type of the reference is a service endpoint interface. |
`wsdlLocation` | Location of the WSDL description for the service |

##### 10.3.9.1. Annotation Type Definition

    /**
     * The <code>WebServiceRef</code> annotation is used to
     * define a reference to a web service and
     * (optionally) an injection target for it.
     * It can be used to inject both service and proxy
     * instances. These injected references are not thread safe.
     * If the references are accessed by multiple threads,
     * usual synchronization techinques can be used to
     * support multiple threads.
     * <p/>
     * Web service references are resources in the Java EE 5 sense.
     * The annotations (for example, {@link Addressing}) annotated with
     * meta-annotation {@link WebServiceFeatureAnnotation}
     * can be used in conjunction with <code>WebServiceRef</code>.
     * The created reference MUST be configured with annotation's web service
     * feature.
     * <p/>
     * If a JAX-WS implementation encounters an unsupported or unrecognized
     * annotation annotated with the <code>WebServiceFeatureAnnotation</code>
     * that is specified with <code>WebServiceRef</code>,
     * an ERROR MUST be given.
     *
     * @see javax.annotation.Resource
     * @see WebServiceFeatureAnnotation
     * @since JAX-WS 2.0
     */
    @Target({ElementType.TYPE, ElementType.METHOD, ElementType.FIELD})
    @Retention(RetentionPolicy.RUNTIME)
    @Documented
    public @interface WebServiceRef {
        /**
         * The JNDI name of the resource.  For field annotations,
         * the default is the field name.  For method annotations,
         * the default is the JavaBeans property name corresponding
         * to the method.  For class annotations, there is no default
         * and this MUST be specified.
         * <p/>
         * The JNDI name can be absolute(with any logical namespace) or
         * relative
         * to JNDI <code>java:comp/env</code> namespace.
         */
        String name() default "";

        /**
         * The Java type of the resource.  For field annotations,
         * the default is the type of the field.  For method annotations,
         * the default is the type of the JavaBeans property.
         * For class annotations, there is no default and this MUST be
         * specified.
         */
        Class<?> type() default Object.class;

        /**
         * A product specific name that this resource should be mapped to.
         * The name of this resource, as defined by the <code>name</code>
         * element or defaulted, is a name that is local to the application
         * component using the resource.  (When a relative JNDI name
         * is specified, then it's a name in the JNDI
         * <code>java:comp/env</code> namespace.)  Many application servers
         * provide a way to map these local names to names of resources
         * known to the application server.  This mapped name is often a
         * <i>global</i> JNDI name, but may be a name of any form.
         * <p/>
         * Application servers are not required to support any particular
         * form or type of mapped name, nor the ability to use mapped names.
         * The mapped name is product-dependent and often
         * installation-dependent.
         * No use of a mapped name is portable.
         */
        String mappedName() default "";

        /**
         * The service class, alwiays a type extending
         * <code>javax.xml.ws.Service</code>. This element MUST be specified
         * whenever the type of the reference is a service endpoint interface.
         */
        // 2.1 has Class value() default Object.class;
        // Fixing this raw Class type correctly in 2.2 API. This shouldn't
        // cause
        // any compatibility issues for applications.
        Class<? extends Service> value() default Service.class;

        /**
         * A URL pointing to the WSDL document for the web service.
         * If not specified, the WSDL location specified by annotations
         * on the resource type is used instead.
         */
        String wsdlLocation() default "";

        /**
         * A portable JNDI lookup name that resolves to the target
         * web service reference.
         *
         * @since JAX-WS 2.2
         */
        String lookup() default "";

    }

#### 10.3.10. `@javax.xml.ws.Action`

The `Action` annotation allows explicit association of `Action` message addressing property with `input`, `output`, and `fault` messages of the mapped WSDL operation.

This annotation can be specified on each method of a service endpoint interface or implementation. For such a method, the mapped operation in the generated WSDL contains explicit `wsaw:Action` attribute on the WSDL `input`, `output` and `fault` messages of the WSDL `operation` based upon which attributes of the `Action` annotation have been specified.

Table 18. `@javax.xml.ws.Action` - Description of Properties

Property | Description | Default
--- | --- | ---
`input` | Explicit value of `Action` message addressing property for the `input` message of the operation. If the value is "", then no `wsaw:Action` is generated. | ""
`ouput` | Explicit value of `Action` message addressing property for the `output` message of the operation. If the value is "", then no `wsaw:Action` is generated. | ""
`fault` | Explicit value of `Action` message addressing property for the `fault` message(s) of the operation. Each exception that is mapped to a fault and requires explicit `Action` message addressing property, need to be specified as a value in this property using FaultAction annotation. | {}

##### 10.3.10.1. Annotation Type Definition

    /**
     * The <code>Action</code> annotation allows explicit association of a
     * WS-Addressing <code>Action</code> message addressing property with
     * <code>input</code>, <code>output</code>, and
     * <code>fault</code> messages of the mapped WSDL operation.
     * <p/>
     * This annotation can be specified on each method of a service endpoint
     * interface.
     * For such a method, the mapped operation in the generated WSDL's
     * <code>wsam:Action</code> attribute on the WSDL <code>input</code>,
     * <code>output</code> and <code>fault</code> messages of the WSDL
     * <code>operation</code>
     * is based upon which attributes of the <code>Action</code> annotation
     * have been specified.
     * For the exact computation of <code>wsam:Action</code> values for the
     * messages, refer
     * to the algorithm in the JAX-WS specification.
     *
     * @see FaultAction
     * @since JAX-WS 2.1
     */

    @Documented
    @Retention(RetentionPolicy.RUNTIME)
    @Target(ElementType.METHOD)
    public @interface Action {
        /**
         * Explicit value of the WS-Addressing <code>Action</code> message
         * addressing property for the <code>input</code>
         * message of the operation.
         */
        String input() default "";

        /**
         * Explicit value of the WS-Addressing <code>Action</code> message
         * addressing property for the <code>output</code>
         * message of the operation.
         */
        String output() default "";

        /**
         * Explicit value of the WS-Addressing <code>Action</code> message
         * addressing property for the <code>fault</code>
         * message(s) of the operation. Each exception that is mapped to a
         * fault and requires an explicit WS-Addressing
         * <code>Action</code> message addressing property,
         * needs to be specified as a value in this property
         * using {@link FaultAction} annotation.
         */
        FaultAction[] fault() default {};
    }

##### 10.3.10.2. Examples

Example 21. `@javax.xml.ws.Action` - Example 1 - Specify explicit values for `Action` message addressing property for `input` and `output` messages.

    @javax.jws.WebService
    public class AddNumbersImpl {
        @javax.xml.ws.Action(
                input = "http://example.com/inputAction",
                output = "http://example.com/outputAction")
        public int addNumbers(int number1, int number2) {
            return number1 + number2;
        }
    }

The generated WSDL looks like:

    <definitions targetNamespace="http://example.com/numbers" ...>

        ...

        <portType name="AddNumbersPortType">
            <operation name="AddNumbers">
                <input message="tns:AddNumbersInput" name="Parameters"
                        wsaw:Action="http://example.com/inputAction"/>
                <output message="tns:AddNumbersOutput" name="Result"
                        wsaw:Action="http://example.com/outputAction"/>
            </operation>
        </portType>

        ...

    </definitions>

Example 22. `@javax.xml.ws.Action` - Example 2 - Specify explicit value for `Action` message addressing property for only the `input` message.

The default values are used for the `output` message.

    @javax.jws.WebService
    public class AddNumbersImpl {
        @javax.xml.ws.Action(input = "http://example.com/inputAction")
        public int addNumbers(int number1, int number2) {
            return number1 + number2;
        }
    }

The generated WSDL looks like:

    <definitions targetNamespace="http://example.com/numbers" ...>

        ...

        <portType name="AddNumbersPortType">
            <operation name="AddNumbers">
                <input message="tns:AddNumbersInput" name="Parameters"
                        wsaw:Action="http://example.com/inputAction"/>
                <output message="tns:AddNumbersOutput" name="Result"/>
            </operation>
        </portType>

        ...

    </definitions>

It is legitimate to specify an explicit value for `Action` message addressing property for `output` message only. In this case, a default value of `wsaw:Action` is used for the `input` message.

Example 23. `@javax.xml.ws.Action` - Example 3 - `@FaultAction`

See ``@javax.xml.ws.FaultAction`` for an example of how to specify an explicit value for `Action` message addressing property for the `fault` message.

#### 10.3.11. `@javax.xml.ws.FaultAction`

The `FaultAction` annotation is used inside an `Action` annotation to allow an explicit association of `Action` message addressing property with the `fault` messages of the WSDL operation mapped from the exception class.

The `fault` message in the generated WSDL operation mapped for `className` class contains explicit `wsaw:Action` attribute.

Table 19. `@javax.xml.ws.FaultAction` - Description of Properties

Property | Description | Default
--- | --- | ---
`className` | Name of the exception class | there is no default and is required.
`value` | Value of `Action` message addressing property for the exception | ""

##### 10.3.11.1. Annotation Type Definition

    @Documented
    @Retention(RetentionPolicy.RUNTIME)
    @Target(ElementType.METHOD)
    public @interface FaultAction {
        /**
         * Name of the exception class
         */
        Class<? extends Exception> className();

        /**
         * Value of WS-Addressing <code>Action</code> message addressing
         * property for the exception
         */
        String value() default "";
    }

##### 10.3.11.2. Examples

Example 24. `@javax.xml.ws.FaultAction` - Example 1 - Specify explicit values for `Action` message addressing property for the `input`, `output` and `fault` message if the Java method throws only one service specific exception.

    @javax.jws.WebService
    public class AddNumbersImpl {
        @javax.xml.ws.Action(
                input = "http://example.com/inputAction",
                output = "http://example.com/outputAction",
                fault = {
                        @javax.xml.ws.FaultAction(className =
                                AddNumbersException.class,
                                value = "http://example.com/faultAction")})
        public int addNumbers(int number1, int number2) throws
                AddNumbersException {
            return number1 + number2;
        }
    }

The generated WSDL looks like:

    <definitions targetNamespace="http://example.com/numbers" ...>

        ...

        <portType name="AddNumbersPortType">
            <operation name="AddNumbers">
                <input message="tns:AddNumbersInput" name="Parameters"
                        wsaw:Action="http://example.com/inputAction"/>
                <output message="tns:AddNumbersOutput" name="Result"
                        wsaw:Action="http://example.com/outputAction"/>
                <fault message="tns:AddNumbersException"
                        name="AddNumbersException"
                        wsaw:Action="http://example.com/faultAction"/>
            </operation>
        </portType>

        ...

    </definitions>

Example 25. `@javax.xml.ws.FaultAction` - Example 1 - Specify explicit values for `Action` message addressing property if the Java method throws only one service specific exception, without specifying the values for `input` and `output` messages.

    @javax.jws.WebService
    public class AddNumbersImpl {
        @javax.xml.ws.Action(
                fault = {@javax.xml.ws.FaultAction(className =
                        AddNumbersException.class,
                        value = "http://example.com/faultAction")})
        public int addNumbers(int number1, int number2) throws
                AddNumbersException {
            return number1 + number2;
        }
    }

The generated WSDL looks like:

    <definitions targetNamespace="http://example.com/numbers" ...>

        ...

        <portType name="AddNumbersPortType">
            <operation name="AddNumbers">
                <input message="tns:AddNumbersInput" name="Parameters"/>
                <output message="tns:AddNumbersOutput" name="Result"/>
                <fault message="tns:addNumbersFault" name="InvalidNumbers"
                        wsa:Action="http://example.com/addnumbers/fault"/>
            </operation>
        </portType>

        ...

    </definitions>

Example 26. `@javax.xml.ws.FaultAction` - Example 1 - Specify explicit values for `Action` message addressing property if the Java method throws more than one service specific exception.

    @javax.jws.WebService
    public class AddNumbersImpl {
        @javax.xml.ws.Action(
                fault = {@javax.xml.ws.FaultAction(className =
                        AddNumbersException.class,
                        value = "http://example.com/addFaultAction"),

                        @javax.xml.ws.FaultAction(className =
                                TooBigNumbersException.class,
                                value = "http://example" +
                                        ".com/toobigFaultAction")})
        public int addNumbers(int number1, int number2) throws AddNumbersException, TooBigNumbersException {
            return number1 + number2;
        }
    }

The generated WSDL looks like:

    <definitions targetNamespace="http://example.com/numbers" ...>

        ...

        <portType name="AddNumbersPortType">
            <operation name="AddNumbers">
                <input message="tns:AddNumbersInput" name="Parameters"/>
                <output message="tns:AddNumbersOutput" name="Result"/>
                <fault message="tns:addNumbersFault" name="AddNumbersException"
                        wsa:Action="http://example.com/addnumbers/fault"/>
                <fault message="tns:tooBigNumbersFault"
                        name="TooBigNumbersException"
                        wsa:Action="http://example.com/toobigFaultAction"/>
            </operation>
        </portType>

        ...

    </definitions>

### 10.4. JSR 222 (JAXB) Annotations

The following JAXB annotations are being documented because JAX-WS generates them when generating wrapper beans and exception beans according to the JAX-WS 2.0 spec. Please refer to sections 3.5.2.1 and 3.6 of the JAX-WS 2.0 specification for more information on these beans. For more information on these and other JAXB annotations please refer to the JAXB 2.0 specification.

#### 10.4.1. `@javax.xml.bind.annotation.XmlRootElement`

This annotation is used to map a top level class to a global element in the XML schema used by the WSDL of the web service.

Table 20. `@javax.xml.bind.annotation.XmlRootElement` - Description of Properties

Property | Description | Default
--- | --- | ---
`name` | Defines the local name of the XML element representing the annotated class | `##default` – the name is derived from the class
`namespace` | Defines the namespace of the XML element representing the annotated class | `##default` – the namespace is derived from the package of the class

##### 10.4.1.1. Annotation Type Definition

    @Retention(RetentionPolicy.RUNTIME)
    @Target({ElementType.TYPE})
    public @interface XmlRootElement {
        /**
         * namespace name of the XML element.
         * <p/>
         * If the value is "##default", then the XML namespace name is
         * derived
         * from the package of the class ( {@link XmlSchema} ). If the
         * package is unnamed, then the XML namespace is the default
         * empty
         * namespace.
         */
        String namespace() default "##default";

        /**
         * local name of the XML element.
         * <p/>
         * If the value is "##default", then the name is derived from
         * the
         * class name.
         */
        String name() default "##default";

    }

##### 10.4.1.2. Examples

Example 27. `@javax.xml.bind.annotation.XmlRootElement` - Example

    @XmlRootElement(name = "addNumbers", namespace = "http://server.fromjava/")
    @XmlAccessorType(XmlAccessType.FIELD)
    @XmlType(name = "addNumbers", namespace = "http://server.fromjava/",
            propOrder = {"arg0", "arg1"})
    public class AddNumbers {

        @XmlElement(name = "arg0", namespace = "")
        private int arg0;
        @XmlElement(name = "arg1", namespace = "")
        private int arg1;

        public int getArg0() {
            return this.arg0;
        }

        public void setArg0(int arg0) {
            this.arg0 = arg0;
        }

        public int getArg1() {
            return this.arg1;
        }

        public void setArg1(int arg1) {
            this.arg1 = arg1;
        }
    }

#### 10.4.2. `@javax.xml.bind.annotation.XmlAccessorType`

This annotation is used to specify whether fields or properties are serialized by default.

Table 21. `@javax.xml.bind.annotation.XmlAccessorType` - Description of Properties

Property | Description | Default
--- | --- | ---
`value` | Specifies whether fields or properties are serialized by default. The value can be `XmlAccessType.FIELD` or `XmlAccessType.PROPERTY` or `XmlAccessType.PUBLIC_MEMBER` or `XmlAccessType.NONE` | `XmlAccessType.PROPERTY`

##### 10.4.2.1. Annotation Type Definition

    @Inherited
    @Retention(RUNTIME)
    @Target({PACKAGE, TYPE})
    public @interface XmlAccessorType {

        /**
         * Specifies whether fields or properties are serialized.
         *
         * @see XmlAccessType
         */
        XmlAccessType value() default XmlAccessType.PUBLIC_MEMBER;
    }

    /**
     * Used by XmlAccessorType to control serialization of fields or
     * properties.
     */
    public enum XmlAccessType {
        /**
         * Every getter/setter pair in a JAXB-bound class will be
         * automatically
         * bound to XML, unless annotated by {@link XmlTransient}.
         * <p/>
         * Fields are bound to XML only when they are explicitly
         * annotated
         * by some of the JAXB annotations.
         */
        PROPERTY,
        /**
         * Every non static, non transient field in a JAXB-bound class
         * will be automatically
         * bound to XML, unless annotated by {@link XmlTransient}.
         * <p/>
         * Getter/setter pairs are bound to XML only when they are
         * explicitly annotated
         * by some of the JAXB annotations.
         */
        FIELD,
        /**
         * Every public getter/setter pair and every public field will
         * be
         * automatically bound to XML, unless annotated by {@link
         * XmlTransient}.
         * <p/>
         * Fields or getter/setter pairs that are private, protected,
         * or
         * defaulted to package-only access are bound to XML only when
         * they are
         * explicitly annotated by the appropriate JAXB annotations.
         */
        PUBLIC_MEMBER,
        /**
         * None of the fields or properties is bound to XML unless they
         * are specifically  annotated with some of the JAXB
         * annotations.
         */
        NONE
    }

##### 10.4.2.2. Examples

Example 28. `@javax.xml.bind.annotation.XmlAccessorType` - Example

    @XmlRootElement(name = "addNumbers", namespace = "http://server.fromjava/")
    @XmlAccessorType(XmlAccessType.FIELD)
    @XmlType(name = "addNumbers", namespace = "http://server.fromjava/",
            propOrder = {"arg0", "arg1"})
    public class AddNumbers {

        @XmlElement(name = "arg0", namespace = "")
        private int arg0;
        @XmlElement(name = "arg1", namespace = "")
        private int arg1;

        public int getArg0() {
            return this.arg0;
        }

        public void setArg0(int arg0) {
            this.arg0 = arg0;
        }

        public int getArg1() {
            return this.arg1;
        }

        public void setArg1(int arg1) {
            this.arg1 = arg1;
        }
    }

#### 10.4.3. `@javax.xml.bind.annotation.XmlType`

This annotation is used to map a value class to an XML Schema type. A value class is a data container for values represented by properties and fields. A schema type is a data container for values represented by schema components within a schema type's content model (e.g. Model groups, attributes etc).

Table 22. `@javax.xml.bind.annotation.XmlType` - Description of Properties

Property | Description | Default
--- | --- | ---
`name` | Defines the local name of the XML type representing this class in the XML schema used by the WSDL of the web service | "`##default`"
`namespace` | Defines the namespace of the XML type representing this class in the XML schema used by the WSDL of the web service | "`##default`"
`propOrder` | Defines a list of names of JavaBean properties in the class. Each name in the list is the name of a Java identifier of the JavaBean property. The order in which JavaBean properties are listed is the order of XML Schema elements to which the JavaBean properties are mapped. All of the JavaBean properties being mapped must be listed (i.e. if a JavaBean property mapping is prevented by `@XmlTransient` then it does not have to be listed). Otherwise, it is an error. By default, the JavaBean properties are ordered using a default order specified in the JAXB 2.0 specification. | {""}

##### 10.4.3.1. Annotation Type Definition

    @Retention(RetentionPolicy.RUNTIME)
    @Target({ElementType.TYPE})
    public @interface XmlType {
        /**
         * Name of the XML Schema type which the class is mapped.
         */
        String name() default "##default";

        /**
         * Specifies the order for XML Schema elements when class is
         * mapped to a XML Schema complex type.
         * <p/>
         * <p> Refer to the table for how the propOrder affects the
         * mapping of class </p>
         * <p/>
         * <p> The propOrder is a list of names of JavaBean properties in
         * the class. Each name in the list is the name of a Java
         * identifier of the JavaBean property. The order in which
         * JavaBean properties are listed is the order of XML Schema
         * elements to which the JavaBean properties are mapped. </p>
         * <p> All of the JavaBean properties being mapped to XML Schema
         * elements
         * must be listed.
         * <p> A JavaBean property or field listed in propOrder must not
         * be transient or annotated with <tt>@XmlTransient</tt>.
         * <p> The default ordering of JavaBean properties is determined
         * by @{@link XmlAccessorOrder}.
         */
        String[] propOrder() default {""};

        /**
         * Name of the target namespace of the XML Schema type. By
         * default, this is the target namespace to which the package
         * containing the class is mapped.
         */
        String namespace() default "##default";

        /**
         * Class containing a no-arg factory method for creating an
         * instance of this class. The default is this class.
         * <p/>
         * <p>If <tt>factoryClass</tt> is DEFAULT.class and
         * <tt>factoryMethod</tt> is "", then there is no static factory
         * method.
         * <p/>
         * <p>If <tt>factoryClass</tt> is DEFAULT.class and
         * <tt>factoryMethod</tt> is not "", then
         * <tt>factoryMethod</tt> is the name of a static factory method
         * in this class.
         * <p/>
         * <p>If <tt>factoryClass</tt> is not DEFAULT.class, then
         * <tt>factoryMethod</tt> must not be "" and must be the name of
         * a static factory method specified in <tt>factoryClass</tt>.
         */
        Class factoryClass() default DEFAULT.class;

        /**
         * Used in {@link XmlType#factoryClass()} to
         * signal that either factory mehod is not used or
         * that it's in the class with this {@link XmlType} itself.
         */
        static final class DEFAULT {
        }

        /**
         * Name of a no-arg factory method in the class specified in
         * <tt>factoryClass</tt> factoryClass().
         */
        String factoryMethod() default "";
    }

##### 10.4.3.2. Examples

Example 29. `@javax.xml.bind.annotation.XmlType` - Example

    @XmlRootElement(name = "addNumbers", namespace = "http://server.fromjava/")
    @XmlAccessorType(XmlAccessType.FIELD)
    @XmlType(name = "addNumbers", namespace = "http://server.fromjava/",
            propOrder = {"arg0", "arg1"})
    public class AddNumbers {

        @XmlElement(name = "arg0", namespace = "")
        private int arg0;
        @XmlElement(name = "arg1", namespace = "")
        private int arg1;

        public int getArg0() {
            return this.arg0;
        }

        public void setArg0(int arg0) {
            this.arg0 = arg0;
        }

        public int getArg1() {
            return this.arg1;
        }

        public void setArg1(int arg1) {
            this.arg1 = arg1;
        }
    }

#### 10.4.4. `@javax.xml.bind.annotation.XmlElement`

This annotation is used to map a property contained in a class to a local element in the XML Schema complex type to which the containing class is mapped.

Table 23. `@javax.xml.bind.annotation.XmlElement` - Description of Properties

Property | Description | Default
--- | --- | ---
`name` | Defines the local name of the XML element representing the property of a JavaBean | "`##default`" - the element name is derived from the JavaBean property name.
`namespace` | Defines the namespace of the XML element representing the property of a JavaBean | "`##default`" - the namespace of the containing class
`nillable` | Not generated by JAX-WS |
`type` | Not generated by JAX-WS |

##### 10.4.4.1. Annotation Type Definition

    @Retention(RetentionPolicy.RUNTIME)
    @Target({ElementType.FIELD, ElementType.METHOD, ElementType.PARAMETER})
    public @interface XmlElement {
        /**
         * Name of the XML Schema element.
         * <p> If the value is "##default", then element name is derived from
         * the
         * JavaBean property name.
         */
        String name() default "##default";

        /**
         * Customize the element declaration to be nillable.
         * <p>If nillable() is true, then the JavaBean property is
         * mapped to a XML Schema nillable element declaration.
         */
        boolean nillable() default false;

        /**
         * Customize the element declaration to be required.
         * <p>If required() is true, then Javabean property is mapped to
         * an XML schema element declaration with minOccurs="1".
         * maxOccurs is "1" for a single valued property and "unbounded"
         * for a multivalued property.
         * <p>If required() is false, then the Javabean property is mapped
         * to XML Schema element declaration with minOccurs="0".
         * maxOccurs is "1" for a single valued property and "unbounded"
         * for a multivalued property.
         */

        boolean required() default false;

        /**
         * XML target namespace of the XML Schema element.
         * <p/>
         * If the value is "##default", then the namespace is determined
         * as follows:
         * <ol>
         * <li>
         * If the enclosing package has {@link XmlSchema} annotation,
         * and its {@link XmlSchema#elementFormDefault() elementFormDefault}
         * is {@link XmlNsForm#QUALIFIED QUALIFIED}, then the namespace of
         * the enclosing class.
         * <p/>
         * <li>
         * Otherwise &#39;&#39; (which produces unqualified element in the
         * default
         * namespace.
         * </ol>
         */
        String namespace() default "##default";

        /**
         * Default value of this element.
         * <p/>
         * <p/>
         * The <pre>'\u0000'</pre> value specified as a default of this
         * annotation element
         * is used as a poor-man's substitute for null to allow implementations
         * to recognize the 'no default value' state.
         */
        String defaultValue() default "\u0000";

        /**
         * The Java class being referenced.
         */
        Class type() default DEFAULT.class;

        /**
         * Used in {@link XmlElement#type()} to
         * signal that the type be inferred from the signature
         * of the property.
         */
        static final class DEFAULT {
        }
    }

##### 10.4.4.2. Examples

Example 30. `@javax.xml.bind.annotation.XmlElement` - Example

    @XmlRootElement(name = "addNumbers", namespace = "http://server.fromjava/")
    @XmlAccessorType(XmlAccessType.FIELD)
    @XmlType(name = "addNumbers", namespace = "http://server.fromjava/",
            propOrder = {"arg0", "arg1"})
    public class AddNumbers {

        @XmlElement(name = "arg0", namespace = "")
        private int arg0;
        @XmlElement(name = "arg1", namespace = "")
        private int arg1;

        public int getArg0() {
            return this.arg0;
        }

        public void setArg0(int arg0) {
            this.arg0 = arg0;
        }

        public int getArg1() {
            return this.arg1;
        }

        public void setArg1(int arg1) {
            this.arg1 = arg1;
        }
    }

#### 10.4.5. `@javax.xml.bind.annotation.XmlSeeAlso`

Instructs JAXB to also bind other classes when binding this class.

Table 24. `@javax.xml.bind.annotation.XmlSeeAlso` - Description of Properties

Property | Description | Default
--- | --- | ---
`value` | Other classes that JAXB can use when binding this class | {}

##### 10.4.5.1. Annotation Type Definition

    /**
     * Instructs JAXB to also bind other classes when binding this class.
     * <p/>
     * Java makes it impractical/impossible to list all sub-classes of
     * a given class. This often gets in a way of JAXB users, as it JAXB
     * cannot automatically list up the classes that need to be known
     * to {@link JAXBContext}.
     * <p/>
     * For example, with the following class definitions:
     * <p/>
     * <pre>
     * class Animal {}
     * class Dog extends Animal {}
     * class Cat extends Animal {}
     * </pre>
     * <p/>
     * The user would be required to create {@link JAXBContext} as
     * <tt>JAXBContext.newInstance(Dog.class,Cat.class)</tt>
     * (<tt>Animal</tt> will be automatically picked up since <tt>Dog</tt>
     * and <tt>Cat</tt> refers to it.)
     * <p/>
     * {@link XmlSeeAlso} annotation would allow you to write:
     * <pre>
     * &#64;XmlSeeAlso({Dog.class,Cat.class})
     * class Animal {}
     * class Dog extends Animal {}
     * class Cat extends Animal {}
     * </pre>
     * <p/>
     * This would allow you to do <tt>JAXBContext.newInstance(Animal.class)
     * </tt>.
     * By the help of this annotation, JAXB implementations will be able to
     * correctly bind <tt>Dog</tt> and <tt>Cat</tt>.
     *
     * @author Kohsuke Kawaguchi
     * @since JAXB2.1
     */
    @Target({ElementType.TYPE})
    @Retention(RUNTIME)
    public @interface XmlSeeAlso {
        Class[] value();
    }

### 10.5. JSR 250 (Common Annotations) Annotations

The following annotations are being documented because JAX-WS endpoints use them for resource injection, and as lifecycle methods. Please refer to sections 5.2.1 and 5.3 of the JAX-WS 2.0 specification for resource injection, and lifecycle management. For more information on these and other common annotations please refer to the JSR 250: Common Annotations for the Java TM Platform .

#### 10.5.1. `@javax.annotation.Resource`

This annotation is used to mark a WebServiceContext resource that is needed by a web service. It is applied to a field or a method for JAX-WS endpoints. The container will inject an instance of the WebServiceContext resource into the endpoint implementation when it is initialized.

Table 25. `@javax.annotation.Resource` - Description of Properties

Property | Description | Default
--- | --- | ---
`type` | Java type of the resource | For field annotations, the default is the type of the field. For method annotations, the default is the type of the JavaBeans property.

##### 10.5.1.1. Annotation Type Definition

    @Target({ElementType.TYPE, ElementType.FIELD, ElementType.METHOD})
    @Retention(RetentionPolicy.RUNTIME)
    public @interface Resource {

        // ...

        /**
         * The Java type of the resource.  For field annotations,
         * the default is the type of the field.  For method annotations,
         * the default is the type of the JavaBeans property.
         * For class annotations, there is no default and this must be
         * specified.
         */
        Class type() default java.lang.Object.class;
    }

##### 10.5.1.2. Examples

Example 31. `@javax.annotation.Resource` - Example

    @WebService
    public class HelloImpl {
        @Resource
        private WebServiceContext context;

        public String echoHello(String name) {
            // ...
        }
    }

#### 10.5.2. `@javax.annotation.PostConstruct`

This annotation is used on a method that needs to be executed after dependency injection is done to perform any initialization. This method MUST be invoked before the class is put into service.

##### 10.5.2.1. Annotation Type Definition

    /**
     * The PostConstruct annotation is used on a method that needs to be
     * executed
     * after dependency injection is done to perform any initialization. This
     * method MUST be invoked before the class is put into service. This
     * annotation MUST be supported on all classes that support dependency
     * injection. The method annotated with PostConstruct MUST be invoked even
     * if the class does not request any resources to be injected. Only one
     * method can be annotated with this annotation. The method on which the
     * PostConstruct annotation is applied MUST fulfill all of the following
     * criteria -
     * - The method MUST NOT have any parameters except in the case of EJB
     * interceptors   in which case it takes an InvocationC	ontext object as
     * defined by the EJB   specification.
     * - The return type of the method MUST be void.
     * - The method MUST NOT throw a checked exception.
     * - The method on which PostConstruct is applied MAY be public, protected,
     * package private or private.
     * - The method MUST NOT be static except for the application client.
     * - The method MAY be final.
     * - If the method throws an unchecked exception the class MUST NOT be
     * put into
     * service except in the case of EJBs where the EJB can handle exceptions
     * and
     * even   recover from them.
     *
     * @see javax.annotation.PreDestroy
     * @see javax.annotation.Resource
     * @since Common Annotations 1.0
     */
    @Documented
    @Retention(RetentionPolicy.RUNTIME)
    @Target(ElementType.METHOD)
    public @interface PostConstruct {
    }

##### 10.5.2.2. Examples

Example 32. `@javax.annotation.PostConstruct` - Example

    @WebService
    public class HelloImpl {
        @PostConstruct
        private void init() {
            // ...
        }

        public String echoHello(String name) {
            // ...
        }
    }

#### 10.5.3. `@javax.annotation.PreDestroy`

The PreDestroy annotation is used on methods as a callback notification to signal that the instance is in the process of being removed by the container. The method annotated with PreDestroy is typically used to release resources that it has been holding.

##### 10.5.3.1. Annotation Type Definition

    /**
     * The PreDestroy annotation is used on methods as a callback
     * notification to
     * signal that the instance is in the process of being removed by the
     * container. The method annotated with PreDestroy is typically used to
     * release resources that it has been holding. This annotation MUST be
     * supported by all container managed objects that support PostConstruct
     * except the application client container in Java EE 5. The method on
     * which
     * the PreDestroy annotation is applied MUST fulfill all of the following
     * criteria -
     * - The method MUST NOT have any parameters except in the case of EJB
     * interceptors in which case it takes an InvocationContext object as
     * defined
     * by the EJB specification.
     * - The return type of the method MUST be void.
     * - The method MUST NOT throw a checked exception.
     * - The method on which PreDestroy is applied MAY be public, protected,
     * package private or private.
     * - The method MUST NOT be static.
     * - The method MAY be final.
     * - If the method throws an unchecked exception it is ignored except in
     * the
     * case of EJBs where the EJB can handle exceptions.
     *
     * @see javax.annotation.PostConstruct
     * @see javax.annotation.Resource
     * @since Common Annotations 1.0
     */

    @Documented
    @Retention(RetentionPolicy.RUNTIME)
    @Target(ElementType.METHOD)
    public @interface PreDestroy {
    }

##### 10.5.3.2. Examples

Example 33. `@javax.annotation.PreDestroy` - Example

    @WebService
    public class HelloImpl {
        public String echoHello(String name) {
            // ...
        }

        @PreDestroy
        private void release() {
            // ...
        }
    }

## 11. Why WS-Addressing?

### 11.1. What is WS-Addressing?

Web Services Addressing provides transport-neutral mechanisms to address Web services and messages. The transport-neutrality is achieved by normalizing the information typically shared between transport protocols and messaging systems. To serve this purpose, WS-Addressing defines two new constructs, Message Addressing Properties (MAPs) and Endpoint Reference (EPR), that normalize the information independent of any particular transport or messaging system. MAPs convey end-to-end message characteristics including addressing for source and destination endpoints as well as message identity that allows uniform addressing of messages independent of the underlying transport. EPR convey the information needed to address a Web service endpoint.

The subsequent sections explain the different use cases served by WS-Addressing.

#### 11.1.1. Transport Neutrality

This section describes how a message can be sent to a Web service endpoint in transport neutral manner.

Example 34. SOAP 1.2 message, without WS-Addressing, sent over HTTP

    POST /fabrikam/Purchasing HTTP 1.1/POST
    Host: example.com
    SOAPAction: http://example.com/fabrikam/SubmitPO

    <S:Envelope
            xmlns:S="http://www.w3.org/2003/05/soap-envelope"
            xmlns:wombat="http://wombat.org/">
        <S:Header>
            <wombat:MessageID>
                uuid:e197db59-0982-4c9c-9702-4234d204f7f4
            </wombat:MessageID>
        </S:Header>
        <S:Body>
            ...
        </S:Body>
    </S:Envelope>

| HTTP transport headers.
| SOAP message in HTTP body.

The host (`example.com`), the dispatch method (`POST`) and the URL to dispatch to (`/fabrikam/Purchasing`) are in the HTTP transport headers. The actual message and implied meaning (for example payload's `QName` or `SOAPAction`) is defined by the messaging system (`SOAP`) or transport protocol (`HTTP`). If the message is to be sent over an alternate transport, such as SMTP, then the information conveyed in HTTP transport headers need to be mapped to SMTP specific headers. On the server side, to dispatch successfully, a Web service stack has to gather the information from the SMTP (as opposed to HTTP) headers and the SOAP message.

Also in the above message, there is no standard header to establish the identity of a message. In this case, `MessageID` header defined in the namespace URI bound to `wombat` prefix is used but is application specific and is thus not re-usable.

WS-Addressing introduce Message Addressing Properties that collectively augment a message to normalize this information.

Example 35. SOAP 1.2 message, with WS-Addressing, sent over HTTP

    POST /fabrikam/Purchasing HTTP 1.1/POST
    Host: example.com
    SOAPAction: http://example.com/fabrikam/SubmitPO

    <S:Envelope
            xmlns:S="http://www.w3.org/2003/05/soap-envelope"
            xmlns:wsa="http://www.w3.org/2005/08/addressing/">
        <S:Header>
            <wsa:MessageID>
                uuid:e197db59-0982-4c9c-9702-4234d204f7f4
            </wsa:MessageID>
            <wsa:To>
                http://example.com/fabrikam/Purchasing
            </wsa:To>
            <wsa:Action>
                http://example.com/fabrikam/SubmitPO
            </wsa:Action>
        </S:Header>
        <S:Body>
            ...
        </S:Body>
    </S:Envelope>

| HTTP transport headers.
| SOAP message in HTTP body.
| Binding of Message Addressing Properties to SOAP 1.2 message.

For example, `wsa:MessageID` is a binding of an abstract property that defines an absolute URI that uniquely identifies the message, `wsa:To` is binding of an abstract absolute URI representing the address of the intended receiver of this message and `wsa:Action` is binding of an abstract absolute IRI that uniquely identifies the semantics implied by this message. All the information earlier shared between transport protocols and messaging systems is now normalized into a uniform format that can be processed independent of transport or application.

If the exactly same message is to be sent/received using a different transport, for example asynchronously over SMTP, then the value of `wsa:To` header could be changed to `mailto:purchasing@example.com`. The updated `wsa:To` header looks like:

    <wsa:To>
        mailto:purchasing@example.com
    </wsa:To>

On the server side, Web services stack can gather all the information from the SOAP message and then dispatch it correctly.

#### 11.1.2. Stateful Web service

Web services are usually stateless, i.e. the service endpoint receives a request and responds back without saving any processing state in between different requests. However making Web services stateful enables to share multiple instances of service endpoints. For example, consider a stateful Bank Web service. The client (say bank customer) can obtain a bank EPR, with relevant state information stored as reference parameters, and invoke a method on that EPR to do a series of banking operations. On the service endpoint, whenever a request is received, the reference parameters from the EPR are available as first-class SOAP headers allowing the endpoint to restore the state.

JAX-WS RI 2.2.6 enables stateful Web services to be annotated with `com.sun.xml.ws.developer.Stateful` annotation.

#### 11.1.3. Simple and Complex MEPs

WS-Addressing defines standard Message Addressing Properties (MAPs) to support simple and complex message patterns. The SOAP Binding defines a mapping of these MAPs to SOAP headers and convey end-to-end message characteristics including addressing for source and destination endpoints as well as message identity. For example `destination` MAP represents an absolute IRI representing the address of the intended receiver of the message and is mapped to a SOAP header with `wsa:To` element name. `reply endpoint` represents an endpoint reference for the intended receiver for replies to this message and is mapped to a SOAP header with `wsa:ReplyTo` element name. In addition, WSDL Binding, also defines requirement on the presence of these MAPs for standard Message Exchange Patterns (MEPs) such as request/response and one-way.

Using these MAPs, complex MEPs can be created. For example:

1. Asynchronous MEP: Using `reply endpoint` MAP, an asynchronous transport may be specified for a synchronous request. For example, a client application might send a request over HTTP and ask to receive the response through SMTP.

2. Conversation MEP: Using `relationship` MAP, that defines the relationship between two messages, a conversational MEP can be defined by correlating multiple request/response MEPs. For example a client sending a request to service endpoint receives a response with `wsa:RelatesTo` MAP. The service endpoint may optionally include `wsa:MessageID` in the response. This MAP can then be included by the client in `wsa:RelatesTo` MAP in next request to the service endpoint there by starting a conversation.

3. Distributed MEP: Using `reply endpoint` and `fault endpoint` MAP, a different transport/address can be specified for receiving normal and fault responses respectively.

#### 11.1.4. Composability with other WS-* specifications

There are several Web services specification (commonly known as WS-* specs) that make use of the abstract properties defined by WS-Addressing. For example WS-Metadata Exchange define a bootstrap mechanism for retrieving metadata before the business message exchange can take place. This mechanism involve sending a WS-Transfer request for the retrieval of a resource's representation. A typical request message looks like:

    <s11:Envelope
            xmlns:s11="http://schemas.xmlsoap.org/soap/envelope/"
            xmlns:wsa="http://www.w3.org/2005/08/addressing">
        <s11:Header>
            <wsa:Action>
                http://schemas.xmlsoap.org/ws/2004/09/transfer/Get
            </wsa:Action>
            <wsa:To>http://example.org/metadata</wsa10:To>
            <wsa:ReplyTo>
                <wsa:Address>http://www.w3.org/2005/08/addressing/anonymous
                </wsa10:Address>
            </wsa:ReplyTo>
            <wsa:MessageID>
                uuid: 68da6b24-7fa1-4da2-8a06-e615bfa3d2d0
            </wsa:MessageID>
        </s11:Header>
        <s11:Body/>
    </s11:Envelope>

| SOAP request message to retrieve metadata about a Web service endpoint.
| WS-Addressing namespace URI bound to "`wsa`" prefix.
| The standard WS-Addressing MAPs used to convey the semantics (`wsa:Action`), receiver (`wsa:To`) of the message, intended receiver of reply (`wsa:ReplyTo`) message and identity (`wsa:MessageID`) information of the message

This message has an empty SOAP Body and relies completely upon standard MAPs to convey all the information. Similarly, a WS-Metadata Exchange response message with metadata looks like:

    <s11:Envelope
            xmlns:s11="http://schemas.xmlsoap.org/soap/envelope/"
            xmlns:wsa="http://www.w3.org/2005/08/addressing">
        <s11:Header>
            <wsa:Action>
                http://schemas.xmlsoap.org/ws/2004/09/transfer/GetResponse
            </wsa:Action>
            <wsa:RelatesTo>
                uuid: 68da6b24-7fa1-4da2-8a06-e615bfa3d2d0
            </wsa:RelatesTo>
        </s11:Header>
        <s11:Body/>
        ...
        <s11:Body/>
    </s11:Envelope>

| The standard WS-Addressing MAPs used to convey the semantics (`wsa:Action`) of the response message and relationship (`wsa:RelatesTo`) to the request message.
| Abbreviated SOAP Body for simplicity which otherwise would contain the MEX response.

WS-Reliable Messaging describes a protocol that allows messages to be delivered reliably between distributed applications in the presence of software component, system or network failures. This specification defines protocol messages that must be exchanged between client and service endpoint, before the business message exchange, in order to deliver the messages reliably. For example, RM Source sends `<CreateSequence>` request message to RM Destination to create an outbound sequence. The message looks like:

    <s11:Envelope
            xmlns:s11="http://schemas.xmlsoap.org/soap/envelope/"
            xmlns:wsa=" http://www.w3.org/2005/08/addressing"
            xmlns:wsrm=" http://schemas.xmlsoap.org/ws/2005/02/rm">
        <s11:Body>
            <wsrm:CreateSequence>
                <wsrm:AcksTo>
                    <wsa:Address>
                        http://www.w3.org/2005/08/addressing/anonymous
                    </wsa:Address>
                </wsrm:AcksTo>
            </wsrm:CreateSequence>
        </s11:Body>
    </s11:Envelope>

| SOAP Body of the request message.

The Body contains an element, `wsrm:AcksTo` (of the type Endpoint Reference), that specifies the endpoint reference to which `<SequenceAcknowledgement>` messages and faults related to sequence creation are sent.

WS-Secure Conversation, WS-Trust, WS-Policy and other similar specifications use the constructs defined by WS-Addressing as building blocks.

### 11.2. WS-Addressing Versions

There are two prominent versions of WS-Addressing that are commonly used:

- W3C WS-Addressing

- Member Submission WS-Addressing

Sun, IBM, BEA, Microsoft and SAP co-authored and submitted a WS-Addressing specification to W3C in August 2004. W3C chartered a new Working Group with a mission to produce a W3C Recommendation for WS-Addressing by refining the submitted specification. The original specification submitted to W3C is referred as "Member Submission WS-Addressing" or "Submission WS-Addressing". The term Member Submission is defined by W3C.

The WG was chartered to deliver a W3C Recommendation for WS-Addressing Core, SOAP Binding (mapping abstract properties defined in Core to SOAP 1.1 and 1.2) and WSDL Binding (mechanisms to define property values in WSDL 1.1 and WSDL 2.0 service descriptions) specification. This separate between Core/Bindings is common methodology where Core is relevant to application developers and Binding (both SOAP and WSDL) is relevant for Web service stack implementers. This collective set of specifications is referred as "W3C WS-Addressing".

JAX-WS RI supports both versions out-of-the-box. Check Users Guide on how to enable either of the versions on a service endpoint starting from Java or starting from WSDL.

## 12. WS-Addressing

### 12.1. WS-Addressing in JAX-WS RI

Web Services Addressing provides transport-neutral mechanisms to address Web services and messages. JAX-WS 2.2 specification requires support for W3C Core, SOAP Binding and Addressing 1.0 - Metadata specifications and defines standard API to enable/disable W3C WS-Addressing on the client and service endpoint. In addition to that, JAX-WS RI also supports Member Submission version of WS-Addressing. The member submission version is supported in an implementation specific way. For compatility with JAX-WS 2.1 behavior, JAX-WS RI 2.2.6 also supports wsdls conforming to WSDL Binding specification. The subsequent sections describe how the two WS-Addressing versions can be enabled/disabled on client and server side .

### 12.2. Why WS-Addressing?

This Why WS-Addressing? explains what is WS-Addressing and why it is required.

### 12.3. Describing WS-Addressing in WSDL

WS Addressing 1.0- Metadata defines standard ways to describe message addressing properties like Action, Destination in wsdl and also indicate the use of Addressing in wsdl. WS-Addressing Metadata specification replaces the previous Web Services Addressing 1.0 - WSDL Binding specification in candidate recommendation earlier. If you are still using wsdls conforming to WS Addressing 1.0 - WSDL Binding specification, skip to the next section. Still you may want to update your wsdls to use in standard ways defined by the W3C recommended Addressing 1.0 - Metadata specification for better interoperability. Also, There is no standard mechanism to describe Member Submission version support in the WSDL and some implementaions have used WS-Policy to indicate the support of member submission version and JAX-WS RI understands such assertion.

#### 12.3.1. WS-Addressing 1.0 - Metadata

Addressing 1.0 - Metadata specification uses Web Services Policy Framework (WS Policy 1.5) and Web Services Policy - Attachment [ WS Policy 1.5 - Attachment] specifications to express the support of Web Services Addressing 1.0. A new policy assertion `<wsam:Addressing>` is defined to express the support of Addressing. The `wsam:Addressing` policy assertion applies to the endpoint policy subject and may be attached to `wsdl11:port` or `wsdl11:binding`.

Indicating the requirement of WS-Addressing: When

    <wsam:Addressing>

is present in a Policy alternative, one is required to use WS-Addressing to communicate with the subject.

Indicating the support of WS-Addressing:

    <wsam:Addressing wsp:Optional="true">

can be used to indicate support for WS-Addressing but does not require the use of it. In these cases, there are no restrictions about the use of WS-Adressing.

In certain cases, the endpoint can lay some restrictions to indicate the messages it can accept with WS-Addressing. Nested asertions can be used to restrict the use of response endpoint inside the `<wsam:Addressing>` assertion.

Requiring the use of Non-Anonymous response endpoints:

    <wsam:Addressing>
        <wsp:Policy>
            <wsam:NonAnonymousResponses/>
        </wsp:Policy>
    </wsam:Addressing>

can be used to indicate that the subject requires WS-Addressing and requires the use of non-anonymous response EPRs. In this case, the response endpoint in the request messages will have to use something other than the anonymous URI as the value of address. This is typically used when the response needs to be sent to a third entity other than the client and service and the response is sent to the non-anonyous URI through a new connection Requiring the use of Anonymous response endpoints:

    <wsam:Addressing>
        <wsp:Policy>
            <wsam:AnonymousResponses/>
        </wsp:Policy>
    </wsam:Addressing>

can be used to indicate that the subject requires WS-Addressing and requires the use of anonymous responses. In this case, the endpoint requires request messages to use response endpoint EPRs that contain the anonymous URI ("`http://www.w3.org/2005/08/addressing/anonymous`") or None URI ("`http://www.w3.org/2005/08/addressing/none`") as the value of address.

#### 12.3.2. WS-Addressing WSDL Binding

W3C WS-Addressing WSDL Binding defines an extensibility element, wsaw:UsingAddressing, that can be used to indicate that an endpoint conforms to the WS-Addressing specification. JAX-WS RI generates this extension element in the WSDL if W3C WS-Addressing is enabled on the server-side. On the client side, the RI recognizes this extension element and enforce the rules defined by the W3C specification. This extensibility element may be augmented with `wsdl:required` attribute to indicate whether WS-Addressing is required (true) or not (false).

W3C WS-Addressing WSDL Binding defines `wsaw:Anonymous` element which when used in conjunction with `wsaw:UsingAddressing` define assertions regarding a requirement or a constraint in the use of anonymous URI in EPRs sent to the endpoint. The WSDL Binding defines three distinct values: `optional`, `required` and `prohibited` to express the assertion. The default value of `wsaw:Anonymous` (equivalent to not present) is `optional`. An operation with `required` `wsaw:Anonymous` value is shown below:

    <wsaw:UsingAddressing wsdl:required="true"/>
    <soap:binding transport="http://schemas.xmlsoap.org/soap/http"
            style="document"/>
    <operation name="addNumbers">
        <soap:operation soapAction=""/>

        ...

        <wsaw:Anonymous>required</wsaw:Anonymous>
    </operation>
    <soap:binding>

In this case, a message received at the endpoint, for this operation, with a non-anonymous ReplyTo or FaultTo EPR will result in a fault message returned back to the client with `wsa:OnlyAnonymousAddressSupported` fault code. There is no such equivalent feature in Member Submission WS-Addressing.

### 12.4. Configuring Addressing on Endpoint

This section describes how W3C and Member Submission WS-Addressing can be enabled/disabled on the server-side.

#### 12.4.1. Starting from WSDL

Starting from WSDL, If the wsdl contains the above described metadata to indicate use addressing at endpoint scope, Addressing is enabled on the server-side. See Describing WS-Addressing in WSDL section for more details.

#### 12.4.2. Starting from Java

This section describes how WS-Addressing can be enabled/disabled if you develop an endpoint starting from a Java SEI.

By default, WS-Addressing is disabled on an endpoint starting from Java. If that is the expected behavior, then nothing else needs to be done. In that case any WS-Addressing headers received at the endpoint are treated like SOAP headers targeted for the appliaction and are ignored.

##### 12.4.2.1. Addressing annotations

If WS-Addressing support needs to be enabled on an endpoint, then along with `javax.jws.WebService` annotation, `javax.xml.ws.soap.Addressing` annotation need to be specified for enabling W3C WS-Addressing. If Member Submission WS-Addressing needs to be enabled then `com.sun.xml.ws.developer.MemberSubmissionAddressing` annotation needs to be specified on the service endpoint. For example, the service endpoint in `fromjava-wsaddressing` sample looks like:

    @javax.xml.ws.soap.Addressing
    @javax.jws.WebService
    public class AddNumbersImpl {

        // ...

    }

To enable, Member Submission WS-Addressing, the SEI definition needs to be changed to:

    @com.sun.xml.ws.developer.MemberSubmissionAddressing
    @javax.jws.WebService
    public class AddNumbersImpl {

        // ...

    }

Once WS-Addressing support is enabled on a service endpoint, then:

- In the generated WSDL, corresponding metadata as described in section Describing Addressing in WSDL is generated.

- All WS-Addressing headers are understood, i.e. if any WS-Addressing header is received with a `mustUnderstand="1"`, then a mustUnderstand fault is not thrown back.

- All WS-Addressing headers received at the endpoint are checked for correct syntax, for example an error is returned back if `wsa:ReplyTo` header does not match the infoset defined in the corresponding specification.

- If any WS-Addressing header received at the endpoint is not of correct cardinality, then an error is returned back to the client.

- If `wsa:Action` header value does not match with that expected for that operation, then an error is returned back to the client.

- Any response message sent back to the client contains the required WS-Addressing headers.

##### 12.4.2.2. Is Addressing Optional or Required ?

Both `javax.xml.ws.soap.Addressing` and `com.sun.xml.ws.developer.MemberSubmissionAddressing` annotations take two optional Boolean parameters, `enabled` (default true) and `required` (default false). If `required` is specified true, then WS-Addressing rules are enforced. Otherwise the inbound message is inspected to find out if WS-A is engaged and then the rules are enforced. See When is WS-Addressing engaged? section for more details on enforcement during runtime.

For example, to enforce Member Submission WS-Addressing rules on the server side, the above code sample will change to:

    @com.sun.xml.ws.developer.MemberSubmissionAddressing(enabled = true,
            required = true)
    @javax.jws.WebServicepublic
    class AddNumbersImpl {

        // ...

    }

### 12.5. On the client side

This section describes how WS-Addressing can be enabled/disabled on the client-side. JAX-WS RI follows the standard extensibility elements in WSDL to enable WS-Addressing support on the client side. In addition, it also allows the client to instruct JAX-WS RI to disable WS-Addressing processing. The assumption is that in this case the client has it's own WS-Addressing processing module. For example, a Dispatch-based client in MESSAGE mode may be used to perform non-anonymous ReplyTo/FaultTo processing.

#### 12.5.1. Implicit behavior

As defined in Describing WS-Addressing in WSDL, If the WSDL contains metadata about the support or requirement of WS-Addressing, JAX-WS RI runtime enables Addressing feature on the client-side.

- Generates `Action`, `To`, `MessageID` and anonymous `ReplyTo` headers on the outbound request.

- Any WS-Addressing headers received on the client are processed.

There is no standard extensibility element for Member Submission WS-Addressing and so there is no implicit behavior defined. It can only be explicitly enabled as described in the next section.

#### 12.5.2. Explicit enabling

If a WSDL does not contain WS-Addressing standard extensibility element, then either W3C WS-Addressing or Member Submission WS-Addressing can be explicitly enabled using `createDispatch` and `getPort` methods on `javax.xml.ws.Service`. The following new APIs are added in JAX-WS 2.1:

-     <T> Dispatch<T> createDispatch(javax.xml.namespace.QName portName, java.lang.Class<T> type, Service.Mode mode, WebServiceFeature... features)

-     Dispatch<java.lang.Object> createDispatch(javax.xml.namespace.QName portName, javax.xml.bind.JAXBContext context, Service.Mode mode, WebServiceFeature... features)

-     <T> T getPort(java.lang.Class<T> serviceEndpointInterface, WebServiceFeature... features)

-     <T> T getPort(javax.xml.namespace.QName portName, java.lang.Class<T> serviceEndpointInterface, WebServiceFeature... features)

Each method is a variation of an already existing method in JAX-WS 2.0. The only addition is an extra var-arg `javax.xml.ws.WebServiceFeature` parameter. A `WebServiceFeature` is a new class introduced in JAX-WS 2.1 specification used to represent a feature that can be enabled or disabled for a Web service.

The JAX-WS 2.1 specification defines `javax.xml.ws.soap.AddressingFeature` to enable W3C WS-Addressing on the client side. In addition, the JAX-WS RI also defines `com.sun.xml.ws.developer.MemberSubmissionAddressingFeature` to enable Member Submission WS-Addressing on the client side.

For example in `fromjava-wsaddressing` example, in order to enable W3C WS-Addressing on a proxy, wsimport is used to generate the `AddNumbersImplService` class. Then a port can be obtained using the `getAddNumbersImplPort` method and passing an instance of `javax.xml.ws.AddressingFeature`. The code looks like:

    new AddNumbersImplService().getAddNumbersImplPort(new javax.xml.ws.AddressingFeature());

Similarly, a `Dispatch` instance with Member Submission WS-Addressing can be created as:

    new AddNumbersImplService().createDispatch(
            new QName("http://server.fromjava_wsaddressing/",
                    "AddNumbersImplPort"),
            SOAPMessage.class,
            Service.Mode.MESSAGE,
            new com.sun.xml.ws.developer.MemberSubmissionAddressingFeature());

Feature Parameters

Both `javax.xml.ws.soap.AddressingFeature` and `com.sun.xml.ws.developer.MemberSubmissionAddressingFeature` take two optional Boolean parameters, `enabled` (default true) and `required` (default false). If enabled, all WS-Addressing headers are generated for an outbound message. If `required` is specified true, then WS-Addressing rules are enforced for inbound message. Otherwise the inbound message is inspected to find out if WS-A is engaged and then the rules are enforced.

For example, to enforce Member Submission WS-Addressing rules on the client side, the above code sample will change to:

    new AddNumbersImplService().getAddNumbersImplPort(new com.sun.xml
            .ws.developer.MemberSubmissionAddressingFeature(true, true));

#### 12.5.3. Explicit disabling

A client may like to instruct JAX-WS RI to disable WS-Addressing processing. The assumption is that in this case the client has it's own WS-Addressing processing module. For example, a Dispatch-based client in MESSAGE mode may be used to perform non-anonymous ReplyTo/FaultTo processing.

WS-Addressing processing can be explicitly disabled using one of new methods added to JAX-WS 2.1 specification as defined in Section 3.2. For example, W3C WS-Addressing processing can be disabled using the following code:

    new AddNumbersImplService().getAddNumbersImplPort(new javax.xml.ws.AddressingFeature(false));

### 12.6. When is WS-Addressing engaged?

W3C WS-Addressing SOAP Binding defines that if a receiver processes a message containing a `wsa:Action` header, then SOAP Binding is engaged, and the rules of the specification are enforced. In JAX-WS RI, if WS-Addressing is explicitly disabled then the RI does not follow the rules of engagement. However if WS-Addressing is either implicitly or explicitly enabled then JAX-WS RI engages WS-Addressing based upon the presence of `wsa:Action` header. JAX-WS RI follows same rule for Member Submission version as well.

In effect, if an endpoint advertises WS-Addressing is required in the WSDL and a client does not send any WS-Addressing header then no WS-Addressing fault is returned back to the client. However if the client send `wsa:Action` header then the endpoint will enforce all the rules of the specification. For example, if the `wsa:MessageID` header is missing for a request/response MEP then a fault with appropriate code and sub-code is thrown back to the client.

### 12.7. Associating Action with an operation

#### 12.7.1. Implicit Action

In most common cases, an implicit Action association, as defined by W3C WS-Addressing 1.0 - Metadata and Member Submission, will be sufficient. For such cases, only using the correct annotation to enable Addressing is required. The client looking at such a WSDL will send the implicit `wsa:Action` header. If only Addressing is enabled by using the appropriate annotation at the SEI,

#### 12.7.2. Explicit Action

This section describes how an explicit Action Message Addressing Property can be associated with an operation in the SEI.

W3C WS-Addressing W3C WS-Addressing 1.0 - Metadata and Member Submission WS-Addressing define mechanisms to associate Action Message Addressing Property with an operation. JAX-WS 2.1 defines `javax.xml.ws.Action` and `javax.xml.ws.FaultAction` annotations to explicitly associate an Action with `input`, `output`, and `fault` messages of the mapped WSDL operation. For example, one of the methods in the `fromjava-wsaddressing` sample looks like:

    @Action(input = "http://example.com/input3", output = "http://example.com/output3",
            fault = {@FaultAction(className = AddNumbersException.class,
            value = "http://example.com/fault3")})
    public int addNumbers3(int number1, int number2) throws AddNumbersException {

        // ...

    }

The generated WSDL fragment looks like:

    <operation name="addNumbers3">
        <input wsam:Action="http://example.com/input3"
                message="tns:addNumbers3"/>
        <output wsam:Action="http://example.com/output3"
                message="tns:addNumbers3Response"/>
        <fault message="tns:AddNumbersException" name="AddNumbersException"
                wsam:Action="http://example.com/fault3"/>
    </operation>

where `wsam` is bound to W3C WS-Addressing 1.0 - Metadata namespace or Member Submission namespace depending upon the annotation used to enable Addressing.

## 13. Stateful Webservice

### 13.1. Introduction

JAX-WS RI has a vendor extension that allows developers to bring back object state to the web service world. Normally, JAX-WS RI only creates one instance of a service class, and have it serve all incoming requests concurrently. This makes it essentially impossible to use instance fields of the service class for any meaningful purpose.

Because of this, people end up coding like C, in anti-OO fashion. Either that or you end up with writing boiler-plate code to dispatch a request to the right instance of your real domain object.

The stateful web service support in JAX-WS RI resolves this problem by having JAX-WS RI maintain multiple instances of a service. By using WS-Addressing behind the scene, it provides a standard-based on-the-wire protocol and easy-to-use programming model.

### 13.2. Usage

Application service implementation classes (or providers) who'd like to use the stateful web service support must declare `@Stateful` annotation on a class. It should also have a public static method/field that takes `StatefulWebServiceManager`.

    @Stateful
    @WebService
    @Addressing
    class BankAccount {

        protected final int id;
        private int balance;

        BankAccount(int id) {
            this.id = id;
        }

        @WebMethod
        public synchronized void deposit(int amount) {
            balance += amount;
        }

        // either via a public static field

        public static StatefulWebServiceManager<BankAccount> manager;

        // ... or  via a public static method (the method name could be
        // anything)

        public static void setManager(StatefulWebServiceManager<BankAccount>
                                              manager) {
            // ...
        }

    }

After your service is deployed but before you receive a first request, the resource injection occurs on the field or the method.

A stateful web service class does not need to have a default constructor. In fact, most of the time you want to define a constructor that takes some arguments, so that each instance carries certain state (as illustrated in the above example).

Each instance of a stateful web service class is identified by an unique `EndpointReference`. Your application creates an instance of a class, then you'll have JAX-WS RI assign this unique EPR for the instance as follows:

    @WebService
    class Bank { // this is ordinary stateless service

        @WebMethod
        public synchronized W3CEndpointReference login(int accountId,
                                                       int pin) {
            if (!checkPin(pin))
                throw new AuthenticationFailedException("invalid pin");
            BankAccount acc = new BankAccount(accountId);
            return BankAccount.manager.export(acc);
        }

    }

Typically you then pass this EPR to remote systems. When they send messages to this EPR, JAX-WS RI makes sure that the particular exported instance associated with that EPR will receive a service invocation.

### 13.3. Things To Consider

When you no longer need to tie an instance to the EPR, use `unexport(Object)` so that the object can be GC-ed (or else you'll leak memory). You may choose to do so explicitly, or you can rely on the time out by using `setTimeout(long, Callback)`.

`StatefulWebServiceManager` is thread-safe. It can be safely invoked from multiple threads concurrently.

## 14. Catalog

### 14.1. Catalog Support

Often times, such as for performance reason or your application specific needs, you have a need where you want to resolve the WSDL/Schema documents resolved from the copy of it you have either bundled with your client or server or just to resolve it not from where a WSDL/schema imports points to but rather from where you want it to be picked up.

#### 14.1.1. A Sample catalog file

Example 36. `jax-ws-catalog.xml`

    <catalog xmlns="urn:oasis:names:tc:entity:xmlns:xml:catalog"
            prefer=" system">

        ...

        < system systemId=" http://foo.org/hello?wsdl" uri="HelloService.wsdl"/>
    </catalog>

##### 14.1.1.1. Location of the catalog file

- For wsimport command-line or ant task

  - use `-catalog` option to pass the catalog file. The name of the catalog file does not matter for wsimport tool but for consistency you may like to call it `jax-ws-catalog.xml`

  - use

        <wsimport catalog="''>

    or

        <xmlcatalog ... />

    with wsimport ant task

- Client Runtime

  - `META-INF/jax-ws-catalog.xml` picked up from classpath

- Lightweight HTTP server (j2se) based endpoints

  - `META-INF/jax-ws-catalog.xml` picked up from classpath

- Servlet based endpoints or JSR 109 based Web Module

  - `WEB-INF/jax-ws-catalog.xml`

- JSR 109 based EJB Modules

  - `META-INF/jax-ws-catalog.xml`

For details on XML catalog see here.

## 15. WAR File Packaging

### 15.1. The WAR Contents

Typically, one creates the WAR file with a GUI development tool or with the `ant` `war` task from the generated artifacts from wsimport, wsgen, or apt tools.

For example, a sample WAR file starting from a WSDL file:

Table 26. Files contained in WAR when starting from WSDL

File | Description
--- | ---
`WEB-INF/classes/hello/HelloIF.class` | SEI
`WEB-INF/classes/hello/HelloImpl.class` | Endpoint
`WEB-INF/sun-jaxws.xml` | JAX-WS RI deployment descriptor
`WEB-INF/web.xml` | Web deployment descriptor
`WEB-INF/wsdl/HelloService.wsdl` | WSDL
`WEB-INF/wsdl/schema.xsd` | WSDL imports this Schema

### 15.2. The `sun-jaxws.xml` File

The `<endpoints>` element contain one or more `<endpoint>` elements. Each endpoint represents a port in the WSDL and it contains all information about `implementation` class, servlet `url-pattern`, `binding`, `WSDL`, `service`, `port` QNames. The following shows a `sun-jaxws.xml` file for a simple `HelloWorld` service. `sun-jaxws.xml` is the schema instance of sun-jaxws.xsd.

    <?xml version="1.0" encoding="UTF-8"?>
    <endpoints xmlns="http://java.sun.com/xml/ns/jax-ws/ri/runtime"
            version="2.0">
        <endpoint name="MyHello" implementation="hello.HelloImpl"
                url-pattern="/hello"/>
    </endpoints>

Endpoint can have the following attributes:

Table 27. `sun-jaxws.xml` - Endpoint element attributes.

Attribute | Optional | Use
--- | --- | ---
`name` | N | Name of the endpoint
`wsdl` | Y | Primary wsdl file location in the WAR file. For e.g. `WEB-INF/wsdl/HelloService.wsdl`. If this isn't specified, JAX-WS will create and publish a new WSDL. When the service is developed from Java, it is recommended to omit this attribute.
`service` | Y | QName of WSDL service. For e.g. `{http://example.org/}HelloService`. When the service is developed from Java, it is recommended to omit this attribute.
`port` | Y | QName of WSDL port. For e.g. `{http://example.org/}HelloPort`. When the service is developed from Java, it is recommended to omit this attribute.
`implementation` | N | Endpoint implementation class name. For e.g: `hello.HelloImpl`. The class should have a `@WebService` annotation. Provider based implementation class should have a `@WebServiceProvider` annotation.
`url-pattern` | N | Should match `<url-pattern>` in `web.xml`
`binding` | Y | Binding id defined in the JAX-WS API. The possible values are: `"http://schemas.xmlsoap.org/wsdl/soap/http"` `"http://www.w3.org/2003/05/soap/bindings/HTTP/"` If omitted, it is considered `SOAP1.1` binding.
`enable-mtom` | Y | Enables MTOM optimization. `true` or `false`. Default is `false`.

Endpoint can have a optional `handler-chain` element:

    <?xml version="1.0" encoding="UTF-8"?>
    <endpoints ...>
        <endpoint ...>
            <handler-chain>
                <handler-chain-name>somename</handler-chain-name>
                <handler>
                    <handler-name>MyHandler</handler-name>
                    <handler-class>hello.MyHandler</handler-class>
                </handler>
            </handler-chain>
        </endpoint>
    </endpoints>

### 15.3. The `web.xml` File

The following shows a `web.xml` file for a simple `HelloWorld` service. It specifies JAX-WS RI specific listener, servlet classes. These classes are `com.sun.ws.transport.http.servlet.WSServletContextListener`, and `com.sun.xml.ws.transport.http.servlet.WSServlet` is servlet

    <?xml version="1.0" encoding="UTF-8"?>
    <!DOCTYPE web-app
            PUBLIC "-//Sun Microsystems, Inc.//DTD Web Application 2.3//EN"
            "http://java.sun.com/j2ee/dtds/web-app_2_3.dtd">
    <web-app>
        <listener>
            <listener-class>
                com.sun.xml.ws.transport.http.servlet.WSServletContextListener
            </listener-class>
        </listener>
        <servlet>
            <servlet-name>hello</servlet-name>
            <servlet-class>com.sun.xml.ws.transport.http.servlet.WSServlet
            </servlet-class>
            <load-on-startup>1</load-on-startup>
        </servlet>
        <servlet-mapping>
            <servlet-name>hello</servlet-name>
            <url-pattern>/hello</url-pattern>
        </servlet-mapping>
        <session-config>
            <session-timeout>60</session-timeout>
        </session-config>
    </web-app>

Remember these requirements when building a WAR:

- WSDL and auxiliary WSDL, Schema files should be packaged under `WEB-INF/wsdl` dir. It is recommended that they need not be packaged when the service is started from Java

- WebService implementation class should contain a `@WebService` annotation. Provider based endpoints should have a `@WebServiceProvider` annotation.

- `wsdl`, `service`, `port` attributes are mandatory for `Provider` based endpoints and can be specified in the `@WebServiceProvider` annotation or deployment descriptor (`sun-jaxws.xml`).

## 16. Interoperability

JAX-WS RI 2.2.6 provides a comprehensive interoperability platform to develop web services solutions. Here are the key interoperability features:

### 16.1. WSDL and Message Level Interoperability

- JAX-WS 2.1

- JAXB 2.1

- SAAJ

- Stax

- WS-I Basic Profile 1.2 and 2.0

- WS-I Simple SOAP Binding Profile 1.0

- WS-I Attachment Profile 1.0

- SOAP 1.1 and SOAP 1.2

- WSDL 1.1

- Web Services Addressing 1.0 - Core, Web Services Addressing 1.0 - SOAP Binding and Web Services Addressing 1.0 - Metadata

- MTOM and SOAP With Attachments

### 16.2. .NET 3.5 Interoperability

- Provided thru WSIT plugins.

- JAX-WS 2.2.6 and WSIT plugins are tightly integrated in to GF v3.1

- Tested for interoperability with .NET 3.0

- .NET 3.0 interoperable WS-* features supported through WSIT

  - WS-ReliableMessaging

  - WS-Policy

  - WS-MEX

  - WS-Security/WS-Security Policy

  - WS-Trust/WS-Secure Conversation

  - WS-AT/WS-Tx (Supported only on Glassfish v2)

  - WS-Addresssing

  - MTOM

- Get standalone consolidated bundle of JAX-WS 2.2.6 and WSIT from Metro website.

Send your feedback to users@jaxws.dev.java.net.

## 17. Endpoint API

Web Service endpoints can be created and published programmatically using `javax.xml.ws.Endpoint` API. An endpoint consists of a Web Service Implementation object and some configuration information. The implementation hosts the web service endpoint using a light weight http server and clients can access the web service as if the endpoint is deployed in a J2EE container. This means that there is no need to have any J2EE servlet or EJB container to host the endpoint. The `Endpoint` API provides a way to configure the endpoint with the necessary binding, metadata (WSDL and schema documents), handlers etc.

### 17.1. `Endpoint`

An endpoint can be created using any of the following constructors:

    Endpoint.create(implementor)

    Endpoint.create(bindingId,implementor)

    Endpoint.publish(address, implementor)

Once the `Endpoint` object is created using the first two constructors, it can be published using `Endpoint.publish()`. Any published `Endpoint` can be stopped using `Endpoint.stop()`. supplychain sample shows creating and publishing an `Endpoint`.

### 17.2. `Endpoint` and `Properties`

An endpoint can be configured to match service name and port name of WSDL using properties. This overwrites implementor object's serviceName, portName from `@WebService` annotation. The port address for an endpoint is patched only if the corresponding port's service name, and port name in WSDL are matched.

Example 37. `Endpoint` and `Properties` Example

    Endpoint endpoint = ...

    Map<String, Object> map = new HashMap<String, Object>();
    map.put(Endpoint.WSDL_SERVICE, new QName(...));
    map.put(Endpoint.WSDL_PORT, new QName(...));

    endpoint.setProperties(map);

### 17.3. `Endpoint` and `Binding`

An endpoint can be configured for different bindings using binding ids. These binding ids are defined in JAX-WS API and endpoint can be configured by specifying `@BindingType` annotation or using binding id in the `Endpoint()` constructors. The parameter in constructor overwrites binding defined by `@BindingType` annotation. If the binding is not specified using `@BindingType` or using a parameter in `Endpoint()` constructor, the default binding is `SOAP1.1`/`HTTP`. Binding object is used to configure MTOM, handler chain etc. SOAP binding object is used to configure SOAP binding specifics like roles.

For example:

Example 38. `Endpoint` and `Binding` Example

The following configures the endpoint for `XML/HTTP` binding.

    Endpoint endpoint = Endpoint.create(HTTPBinding.HTTP_BINDING,
            implementor);

Working with a `Binding` object:

    // setting MTOM
    SOAPBinding binding = (SOAPBinding) endpoint.getBinding();
    binding.setMTOMEnabled(true);

    // setting SOAP binding roles
    binding.setRoles(...);

    // setting handler chain
    binding.setHandlerChain(...);

### 17.4. `Endpoint` and `metadata`

When the service endpoint is created using existing java classes, the implementation dynamically generates and publishes WSDL and schema documents. But when the service endpoint is created using existing WSDL documents, the same WSDL documents can be used for publishing using metadata facility. When a `Source` object is created, set `systemId` always and make sure the imports are resolvable w.r.t `systemId`s.

Example 39. `Endpoint` and `metadata` Example

    // metadata processing for WSDL, schema files
    List<File> metadataFile =...
    List<Source> metadata = new ArrayList<Source>();
    for (File file : metadataFile) {
        Source source = new StreamSource(new FileInputStream(file));
        source.setSystemId(file.toURL().toExternalForm());
        metadata.add(source);
    }
    endpoint.setMetadata(metadata);

Prev |  | Next
Release Notes | Home | Tools